MX-3.com

You have to make sure that : - Ignition Timing is ok (wires and all that) - Gas line ok - Intake ok as well - TPS ok (very tricky one) - ECU ok (If you have a straight neck I am not sure it works with stock k8 , give it a try) - Fuel Pressure Regulator ok - Check all the little wires/tubes that goes...

i burned my ecu , on the eprom i've had the right code ... but i just did something wrong , soldering or smthing ,,,,, best way : 1. Buy a KL-36 ECU and you're good 2.Send ECU to Ryan .. 3. Try doing it yourself so you can burn it easily :) take care guys. (still run in k8 ECU , and a crappy clutch ...

i changed the chip with the code on it ... But i is not working .. I've got the right chip from Ryan , but with the chip or without the chip installed the engine does not start without pushing the gas. when it starts after 10 sec i have a biiiggg cloud of blue smoke or black dunno ... aniway that te...

if you know about computers (bios for eg) you cant go wrong , there is a sign on the board and aswell on the chip which has to match Yes sir . there is no doubt , early K8 Ecu cant be chipped , and the chip that has to be replaced , was the one i picked it ... i reaziled it , cause the chip looked l...

Guys , i have a 2XXX , from a 93 MX3 . I checked with Ryan , he sent me 2 wrong chips .. they are not for k8 ... i will check the connections to the pins and then wait for the right chip ... i am freaking out cause i searched this ECU for 1 month , and i paid 120 for it :D :D :D , so imagine it not ...

i saw it , i changed it , but i think its not properly installed , cause with the chip or without , it does the same. Thx

1

i did a reset of the ecu , but without gas , it will not start , then it sound weird the engine , and after 10 sec i have a lot of smoke blue in the back , or aniway a smoke showing the mix is not good . Another thing , i dont have DIAG mode animore , and when the engine starts the fan comes on and ...

i managed to get a 93' k8 ecu , with the good code ... i removed the eprom with that code ending in 2061 , then in place i put the socket and then i installed the chip .. Went to put it in the car , but wont work , dies right away , like when your vaf is disconnected. What could be ? :D there where ...

Omg , this is pure BAD luck !
Thank you for your efforts.


,M

I got the chip like 3 days ago from him, i ordered in 29 June , so i think it was ok . Anyway its the same deal cause i dont have the right k8 ECu , looks like nobody want's to sell the k8 ecu that can be chipped , i have a feeling it comes from the 93 models .. .sigh ,anyway ..

guys , do you have a k8 ECU for me ? Searching since weeks ,,,, nothing around here , everybody is scared to check the ecu on their cars (kijiji sellers THX ! ) Scrap yard here in mtl = NO WAY ! GOOGLE = nothing , just type k8 ecu and youll see Ebay = nothing as well Kijiji = c.\r.p ! Montreal = wro...

i found this interesting web-page, http://www.clarks-garage.com/shop-manual/ts-04.htm now is it really the clutch or the mounts ? .. Whenever i depress the clutch pedal the engine makes vibrations, sometimes hard ones , sometimes soft , and rarely it is smooth . While cruising,accelerating,decelerat...

lol , google helped me a lot :P intake -> http://www.prmracing.com/ - here are different opinions most ppl would say to buy a KN filter + integra CAI kit S plugs -> http://www.yourhotcar.com/product/list/All/Mazda/MX3/Performance_Parts/Spark_Plugs - ngk are the best turbo -> http://hondaswap.com/auc...

no no no , you dont get me ... in one second the engine does not get colder , but hotter.

So when you turn off the engine , take the reading in the same time ! dont wait not even two seconds.

I am trying to say that these readings are weird.


,M