New Brake Kit since february

ironside · Post by **ironside** » May 10th, 2007, 7:28 am

Hi,

i'm martin from germany, my english is not the best one, so sorry for that.
since last year, i plan a supercharger and so, i have to change some parts, the exhaust system is at 3" and since a few months the brake system is also changed.
is a brembo with 323mmx28mm discs.
to see on the picture, absolutly minimum is 17"...it's nearly the rims, so 18" will be better.

Post by **Mooneggs** » May 10th, 2007, 9:14 am

do you have more pictures of your car or pictures from when you installed it? Looks like a nice ride!

ironside · Post by **ironside** » May 10th, 2007, 9:30 am

yes i have,

pics from installation:

next months will come new rims, oz ultraleggera.

engine is kl-ze:

http://freenet-homepage.de/ironside/mx-motor.JPG

at least the mx from inside:

and many many more mods on this car.

ironside · Post by **ironside** » May 10th, 2007, 10:14 am

and some more pics

PATDIESEL · Post by **PATDIESEL** » May 10th, 2007, 12:40 pm

What is that actuator for on the exhaust? Nice looking brakes. Any input on the performance. Are you willing to sell copies of the caliper relocation bracket?

Post by **Custommx3** » May 10th, 2007, 1:09 pm

Why is this in new product development?

If your just showing off your parts and not making them available on the openmarket, then we need to move this topic out of here.

Post by **Custommx3** » May 10th, 2007, 1:11 pm

PATDIESEL wrote:What is that actuator for on the exhaust? Nice looking brakes. Any input on the performance. Are you willing to sell copies of the caliper relocation bracket?

Looks as ifit dumps open the exhaust to open on the side.

ironside · Post by **ironside** » May 10th, 2007, 2:17 pm

brake kit can be order for 1600 € (today trading 1,3482 ) so about 2.157$
exlude shipping.
kit contains: brembo calipers (4piston); 323x28mm discs; bracket to fit caliper to mx, highstrengh screws, steel flex breakline from brembo, ferodo breakpads, aluminium ring to center the breakdisc, paper from german tüv.

ironside · Post by **ironside** » May 10th, 2007, 2:21 pm

Custommx3 wrote:Why is this in new product development?

please excuse, if you want to take it to another part than please do that.

Post by **Mooneggs** » May 10th, 2007, 2:35 pm

Custommx3 wrote:
PATDIESEL wrote:What is that actuator for on the exhaust? Nice looking brakes. Any input on the performance. Are you willing to sell copies of the caliper relocation bracket?
Looks as ifit dumps open the exhaust to open on the side.

What would be the benefit of this?

brake kit can be order for 1600 € (today trading 1,3482 ) so about 2.157$ exlude shipping.

wow $2200 for a brake kit... that's quite the upgrade!!!

ironside · Post by **ironside** » May 11th, 2007, 5:06 am

the actuator on the exhaust is for long terms, remember we have autobahn in germany, where you can drive as fast as you can

after 2 hours full speed you got strong headache, so it's quite nice to have it

@mooneggs: thats a normal price in europe for brembo, ap racing costs about 4000$, only wilwood is much cheaper, but not always the best.

Steeb · Post by **Steeb** » May 11th, 2007, 2:04 pm

is there a rear kit?

monty73741 · Post by **monty73741** » May 12th, 2007, 9:24 am

Who is making this kit first.

What do you get with the kits (pics)

How do we pay

Have you contacted the web master about selling on his site

ironside · Post by **ironside** » May 12th, 2007, 12:51 pm

I make this kit first. draw the holder with autocad.
In a few months a rear kit will be ready. girling calipers with mechanical handbrake, 288x25mm discs (we have to do it that way, because of the german tüv)
ok, you're right, i didn't contacted the webmaster about selling this kit. so wait some weeks until the webpage is online. on this page you will get information and a lot of pics and will read about ways to pay and shipping.
my mistake, i will stop advertisement now. excuse me!

houls69 · Post by **houls69** » May 14th, 2007, 6:29 pm

[quote="ironside"]brake kit can be order for 1600 € (today trading 1,3482 ) so about 2.157$
exlude shipping.
kit contains: brembo calipers (4piston); 323x28mm discs; bracket to fit caliper to mx, highstrengh screws, steel flex breakline from brembo, ferodo breakpads, aluminium ring to center the breakdisc, paper from german tüv.[/quote]

Is there a need to upgrade anything else on the brake system to make it work??