New Brake Kit since february
New Brake Kit since february
Hi,
i'm martin from germany, my english is not the best one, so sorry for that.
since last year, i plan a supercharger and so, i have to change some parts, the exhaust system is at 3" and since a few months the brake system is also changed.
is a brembo with 323mmx28mm discs.
to see on the picture, absolutly minimum is 17"...it's nearly the rims, so 18" will be better.
i'm martin from germany, my english is not the best one, so sorry for that.
since last year, i plan a supercharger and so, i have to change some parts, the exhaust system is at 3" and since a few months the brake system is also changed.
is a brembo with 323mmx28mm discs.
to see on the picture, absolutly minimum is 17"...it's nearly the rims, so 18" will be better.
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
do you have more pictures of your car or pictures from when you installed it? Looks like a nice ride!
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
yes i have,
pics from installation:
next months will come new rims, oz ultraleggera.
engine is kl-ze:
http://freenet-homepage.de/ironside/mx-motor.JPG
at least the mx from inside:
and many many more mods on this car.
pics from installation:
next months will come new rims, oz ultraleggera.
engine is kl-ze:
http://freenet-homepage.de/ironside/mx-motor.JPG
at least the mx from inside:
and many many more mods on this car.
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
What is that actuator for on the exhaust? Nice looking brakes. Any input on the performance. Are you willing to sell copies of the caliper relocation bracket?
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
brake kit can be order for 1600 € (today trading 1,3482 ) so about 2.157$
exlude shipping.
kit contains: brembo calipers (4piston); 323x28mm discs; bracket to fit caliper to mx, highstrengh screws, steel flex breakline from brembo, ferodo breakpads, aluminium ring to center the breakdisc, paper from german tüv.
exlude shipping.
kit contains: brembo calipers (4piston); 323x28mm discs; bracket to fit caliper to mx, highstrengh screws, steel flex breakline from brembo, ferodo breakpads, aluminium ring to center the breakdisc, paper from german tüv.
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
What would be the benefit of this?Custommx3 wrote:Looks as ifit dumps open the exhaust to open on the side.PATDIESEL wrote:What is that actuator for on the exhaust? Nice looking brakes. Any input on the performance. Are you willing to sell copies of the caliper relocation bracket?
wow $2200 for a brake kit... that's quite the upgrade!!!brake kit can be order for 1600 € (today trading 1,3482 ) so about 2.157$ exlude shipping.
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
the actuator on the exhaust is for long terms, remember we have autobahn in germany, where you can drive as fast as you can
after 2 hours full speed you got strong headache, so it's quite nice to have it
@mooneggs: thats a normal price in europe for brembo, ap racing costs about 4000$, only wilwood is much cheaper, but not always the best.
after 2 hours full speed you got strong headache, so it's quite nice to have it
@mooneggs: thats a normal price in europe for brembo, ap racing costs about 4000$, only wilwood is much cheaper, but not always the best.
- monty73741
- Forum Moderator
- Posts: 2651
- Joined: February 11th, 2001, 2:01 am
- Location: baltimore,md usa
- Contact:
Who is making this kit first.
What do you get with the kits (pics)
How do we pay
Have you contacted the web master about selling on his site
What do you get with the kits (pics)
How do we pay
Have you contacted the web master about selling on his site
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
I make this kit first. draw the holder with autocad.
In a few months a rear kit will be ready. girling calipers with mechanical handbrake, 288x25mm discs (we have to do it that way, because of the german tüv)
ok, you're right, i didn't contacted the webmaster about selling this kit. so wait some weeks until the webpage is online. on this page you will get information and a lot of pics and will read about ways to pay and shipping.
my mistake, i will stop advertisement now. excuse me!
In a few months a rear kit will be ready. girling calipers with mechanical handbrake, 288x25mm discs (we have to do it that way, because of the german tüv)
ok, you're right, i didn't contacted the webmaster about selling this kit. so wait some weeks until the webpage is online. on this page you will get information and a lot of pics and will read about ways to pay and shipping.
my mistake, i will stop advertisement now. excuse me!
[quote="ironside"]brake kit can be order for 1600 € (today trading 1,3482 ) so about 2.157$
exlude shipping.
kit contains: brembo calipers (4piston); 323x28mm discs; bracket to fit caliper to mx, highstrengh screws, steel flex breakline from brembo, ferodo breakpads, aluminium ring to center the breakdisc, paper from german tüv.[/quote]
Is there a need to upgrade anything else on the brake system to make it work??
exlude shipping.
kit contains: brembo calipers (4piston); 323x28mm discs; bracket to fit caliper to mx, highstrengh screws, steel flex breakline from brembo, ferodo breakpads, aluminium ring to center the breakdisc, paper from german tüv.[/quote]
Is there a need to upgrade anything else on the brake system to make it work??