blueprints on lambo doors

mx3_rider69 · Post by **mx3_rider69** » September 15th, 2005, 11:48 am

does anybody have or know someone that has blueprints for the lambo hinges, my mechanic has his own body shop and is will to make them for the mx3 if succesful we will try to make them for everybody else very cheap so plz any help would be great

ps: if we are able to pull it off would anybody would be interest in buying it?

ovendenk · Post by **ovendenk** » September 15th, 2005, 1:48 pm

hell ya i'm interested. i've been compiling all sorts of photos of the hinges as well as how they are mounted. if i could just figure out how to scale the pictures i have...

oh ya and from what i've heard, it's gotta be 1/4" thick if you're using steel. have you guys decided on what material you'll be using? please use something that won't rust like a mofo.

Post by **Custommx3** » September 15th, 2005, 1:56 pm

I think jarid purchased the rights and the cad drawings. I dont think he'd give away what he paid for.

havoc13 · Post by **havoc13** » September 15th, 2005, 2:02 pm

i' m new here but to me it all depends on the price for them

fry_81 · Post by **fry_81** » September 15th, 2005, 6:37 pm

ask sam baker if he's still got the lambo hinges, i know he used too... im sure he'd be nice enough to help us out

mx3_rider69 · Post by **mx3_rider69** » September 15th, 2005, 11:41 pm

how do i get a hold of sam baker

if i get a hand in those blueprints i am 100% sure my mechanic wil be able to pull it off he has done it for a civics and cavalier's long time ago but he lost the blueprints when he moved to his new shop

thanks for ur help

fry_81 · Post by **fry_81** » September 16th, 2005, 7:41 am

heres a link to his profile....
http://mx-3.com/phpbb2/profile.php?mode ... ile&u=5239
good luck, ive always wanted a set on my car.

havoc13 · Post by **havoc13** » September 16th, 2005, 12:31 pm

i heard a guy in oshawa sells them for 600 without the shocks

mx3_rider69 · Post by **mx3_rider69** » September 16th, 2005, 12:55 pm

well if i get it done im will sell them cheaper

does anybody know someone else

ovendenk · Post by **ovendenk** » September 16th, 2005, 3:35 pm

havoc13 wrote:i heard a guy in oshawa sells them for 600 without the shocks

those are the ones sam got and the guy is NOT RELIABLE. he's been banned from here a few times and it took him stupid like 2 months to get sam his hinges. if that wasn't enough sam said they needed modifying and they had surface rust right off the bat.

sam or anyone, if i have said something not entirely true please correct me, but i have personally talked to shea a long time ago and he's not that quick.

i still have all my old email conversations with shea including the one where he told me it only costs him $250 CDN to make them and he's charging $600 USD on eBay now. nice mark up for a crap product.

Nallboy · Post by **Nallboy** » September 19th, 2005, 1:04 pm

Well... I had been in contact with Sam, and he had said he'd send me his, or at least some prints. My old man has his own shop with some really kickass machinery. He manufactures cranes and barges etc., so enough material for some hinges wouldn't have been too hard to come by. Plus, I have a guy who can do some great powdercoating for cheap...but Sam ended up selling his hinges, and I haven't been able to get ahold of anything since then...

monty73741 · Post by **monty73741** » September 19th, 2005, 3:52 pm

contact jarid

Dominicanchu_Nmbr1 · September 20th, 2005, 11:00 am

hey guys. i got pics of my hinges installed. email me at dominicanchu_nmbr1@yahoo.com so I can send them to whoever needs'em. The pics are taken from different angles (side, front, top)-helps in determining measurements I guess. I took the pics of them without the shocks so that they wouldn't be in the way. These originally were for another car, so they're a little bigger than Sam's hinges, which are forcing me to make wide body fenders for my car. But I'm sure that the design can be modified for those who want to keep their fenders stock.

monty73741 · Post by **monty73741** » September 20th, 2005, 11:32 am

once again email jarid perry, the ORGINATOR of the CF hood, he bought them & is looking to get them made also, he spent his hard earned money to get the blue prints, you can purchase a copy from him.THINGS COSY MONEY IF YOU WANT SOMETHING CHEAP THEN BUY A CIVIC.

Post by **Custommx3** » September 20th, 2005, 12:21 pm

I dont think jarid will sell them as I stated already. Hes looking to have them made to sell.