The Drift KIT

Chasing_Size · Post by **Chasing_Size** » March 20th, 2005, 10:56 pm

So

I just got finished dremmeling for 5 hours and my lungs feel like i've inhaled about a lb worth of endo smoke.... Thus

The drift kit is the most poorly made mould i've ever seen, like, im talking, I took so much off the f---ing skirt for it to fit... It was rediculous...

ANYHOW, Buyer be warned that the drivers side lines up pretty well, the passenger side however does not at all, requires alot of dremmeling...

Just a question to anyone that has fitted the drift kit on, Did you mount it to the body with screws? or what? What's the easiest way?

I haven't started mounting the front bumper yet, I'd like feedback from anyone who has...

My car goes in for paint this wed... So All of you will have a drift kit to look at... fully painted

Corvette red w/ gunmetal rims / tails and a CF invader hood

Wish me luck

mitmaks · Post by **mitmaks** » March 21st, 2005, 2:24 pm

post some in progress pics too

Chasing_Size · Post by **Chasing_Size** » March 21st, 2005, 3:02 pm

I'll post some wed morning

sweetmx3 · Post by **sweetmx3** » March 21st, 2005, 4:28 pm

Damn Ev when u get things rolling u really get them rolling hope yo see some pics soon maybe when it is all finished u can stop by and yes some year i will pick up that CF hood.

Chasing_Size · Post by **Chasing_Size** » March 21st, 2005, 4:38 pm

ahahaha, ok lou... anytime your ready buddy

EZ_4_FUN · Post by **EZ_4_FUN** » March 21st, 2005, 5:09 pm

Chasing_Size wrote:I'll post some wed morning

ehem~!!

Evan? Are we forgetting something? should I say someone?

Chasing_Size · Post by **Chasing_Size** » March 21st, 2005, 5:25 pm

ya ya, I love you oscar
Oscar supplied me with the kit, at a very affordable price

Mad_Medeiros · Post by **Mad_Medeiros** » March 21st, 2005, 5:31 pm

where do you guys find all these things, around my town its almost impossible to find kits etc.. and I love like 30 minuits away from you

babyblueMX3 · Post by **babyblueMX3** » March 21st, 2005, 5:43 pm

Mad_Medeiros wrote:where do you guys find all these things, around my town its almost impossible to find kits etc.. and I love like 30 minuits away from you

the internet is your friend..don't go to speed shops..buy them over the internet..you have tons of possibilites

Bling Bling · Post by **Bling Bling** » March 22nd, 2005, 8:07 am

I have the complete drift kit but for financial reasons, the front is only going on. I've taken pictures throughout and it also gets painted on Wednesday ( Sapphire Green with Green Envy Pearl ). I would love to send pics but not sure how to post ( I've treid ). Send me your Email.

Chasing_Size · Post by **Chasing_Size** » March 22nd, 2005, 8:35 am

Did the front fit up well?

Nd4SpdSe · Post by **Nd4SpdSe** » March 22nd, 2005, 8:51 am

Mad_Medeiros wrote:where do you guys find all these things, around my town its almost impossible to find kits etc.. and I love like 30 minuits away from you

Pakfeifer has a good amount of kits, and their based in Toronto, so it workes out well. I got my MazdaSpeed bumper and rear spoiler from them

Bling Bling · Post by **Bling Bling** » March 22nd, 2005, 10:30 pm

I have some pictures of it on the MX-West Calgary Forum page "Nearly Complete". Check them out and see what you think.

sweetmx3 · Post by **sweetmx3** » March 24th, 2005, 10:45 am

Ev when it's all done and when done in the Falls u should come by for a look see talk to u later.

Chasing_Size · Post by **Chasing_Size** » March 25th, 2005, 1:51 pm

Update:

Car has been lowered with suspension technique springs and tockico blues, bumper has been fitted, side skirts have been fitted, much glass had to be added for strength and fitment, paint should happen by this wed

pics will be up thursday.

I'm still very disappointed in the fitment of this bumper and skirts, way to much work was involved to get them to fit

If my uncle didn't own a bodyshop, this woulda been expensive

MX-3.com

The Drift KIT - Some Assembly Required

The Drift KIT - Some Assembly Required

Drift Kit