front crossmember??
front crossmember??
Hey guys, Just wondering- I read somewhere on here for parts that are swapable form V6 to 4cyl. that the front crossmember of the V6 would fit the 4cly. but i look at mine and it wont the holes are not there? I have it installed now..took my car to a local machine shop and they drill the holes and tapped them, but i was just wondering why the holes are not there to begine with....It is still an mx-3!!!!!
Re: front crossmember??
answer the man I was wondering the same thing
-
- Regular Member
- Posts: 764
- Joined: June 16th, 2002, 2:01 am
Re: front crossmember??
Have no idea. Thought the GS front transverse member was a straight bolt-on addition for all 4 cyl. models. Mine is a 95 4 cyl. and I didn't have to do anything but buy the t-member + 4 bolts... threaded holes were already there.
Re: front crossmember??
If your asking if the V6 front lower sway bar fits an RS the answer is no. One would have to swap over parts of the GS's front suspension in order to fit the sway bar. If your not talking about the front lower sway bar, i have made an a$$ of myself
Black 94 RS, Erebuni MS style front, OEM sideskirts, Clear signals, altezza tails, 93 seats, Civic projectors
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Re: front crossmember??
yah you didOriginally posted by Joe's 94 RS:
If your asking if the V6 front lower sway bar fits an RS the answer is no. One would have to swap over parts of the GS's front suspension in order to fit the sway bar. If your not talking about the front lower sway bar, i have made an a$$ of myself
their not talking about the Sway Bar. they wanted to know why the 4 cyl Mx3 isnt drilled for the V6 Front lower cross member. supposidly the 94-95 is drilled for it. my 95 is not, other wise i would have put one on already. but like somone said their 95 was. so i guess its the luck of the draw. the reason they probably wernt drilled is because the 4 cyl is just the base model and drilling and tapping the holes was one extra thing they didnt have to do. i dont think its going to be too difficult to do.
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
Re: front crossmember??
For sure like I said I had it done!! I help do it and it wasnt hard at all!! Good luck
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: front crossmember??
I dunno why so many ppl call it a crossmember when it actually acts as a tiebar. The crossmember is the thing that bolts from the front to back of the engine bay amd supports the transmission & engine.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
Re: front crossmember??
Some may be pre drilled simply because they might have used parts that otherwise would never have gone to waste.. why create more when you can use somethign you have in a warehouse.Originally posted by Josh:
yah you didOriginally posted by Joe's 94 RS:
If your asking if the V6 front lower sway bar fits an RS the answer is no. One would have to swap over parts of the GS's front suspension in order to fit the sway bar. If your not talking about the front lower sway bar, i have made an a$$ of myself
their not talking about the Sway Bar. they wanted to know why the 4 cyl Mx3 isnt drilled for the V6 Front lower cross member. supposidly the 94-95 is drilled for it. my 95 is not, other wise i would have put one on already. but like somone said their 95 was. so i guess its the luck of the draw. the reason they probably wernt drilled is because the 4 cyl is just the base model and drilling and tapping the holes was one extra thing they didnt have to do. i dont think its going to be too difficult to do.
and i always wondered the same thing groharlem
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Regular Member
- Posts: 764
- Joined: June 16th, 2002, 2:01 am
Re: front crossmember??
Yah, I know you know this stuff Gro, but it's probably just confusion re terminology when everyone is really talking about the same part. Mazda refers to it (the front lower tiebar thingamabobOriginally posted by Gro Harlem:
I dunno why so many ppl call it a crossmember when it actually acts as a tiebar. The crossmember is the thing that bolts from the front to back of the engine bay amd supports the transmission & engine.
Re: front crossmember??
i know the proper name for it and im sure some others do it but i say crossmember anyway cuz it goes across and everyone else refers to it as crossmember so if u say anything else nobody will know what u are talking about. like my run on sentences....Originally posted by Gro Harlem:
I dunno why so many ppl call it a crossmember when it actually acts as a tiebar. The crossmember is the thing that bolts from the front to back of the engine bay amd supports the transmission & engine.
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: front crossmember??
True...just like the ppl on Probetalk think their stock engines are KL03's when no such engine exists.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
Re: front crossmember??
Oh it must exsist i read it on the internet so it has to be true.. same with the space aliens who are winning all the lotery tickets and will soon amass all the money in the world...Originally posted by Gro Harlem:
True...just like the ppl on Probetalk think their stock engines are KL03's when no such engine exists.
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Regular Member
- Posts: 193
- Joined: October 21st, 2003, 2:01 am
- Location: Fort Lauderdale, FL USA
Re: front crossmember??
Ok, I don't quite understand what piece you guys are talking about.
Is it the piece that SRD Performance sells for the v6 and not the l4?
This thing?
<small>[ June 09, 2004, 10:52 AM: Message edited by: Spotted ]</small>
Is it the piece that SRD Performance sells for the v6 and not the l4?
This thing?
<small>[ June 09, 2004, 10:52 AM: Message edited by: Spotted ]</small>
-
- Regular Member
- Posts: 764
- Joined: June 16th, 2002, 2:01 am
Re: front crossmember??
Yup.Originally posted by Spotted:
[QB] Ok, I don't quite understand what piece you guys are talking about. Is it the piece that SRD Performance sells for the v6 and not the l4?[QB]