So someone at the dutch forum mentioned that a MG TF 160 brakes a lot better than an mx-3.
Now that got me looking at that brake setup.
The calipers are 4 Piston, 304mm disc's and 4x100 bolt pattern.
Here's the caliper, look easy enough to make a bracket for.
The only thing is, the hub. The mx-3 hub is 55mm the MG's 57,9. Which would ask for a spigot of less than 1,5mm thick. Would the spigot survive the heat or would it crack?
![Image](http://www.mgf.ultimatemg.com/group2/brakes/brake_images/brake_AP_calipers.jpg)
![Image](http://media.mister-auto.com/trw/remschijf-voor/624x390/161df2702-1.jpg)
![Image](http://media.mister-auto.com/trw/front-brake-disc/624x390/161df4529-1.jpg)