KLZE 7-Post Distributor Cap?
KLZE 7-Post Distributor Cap?
Does anyone have any contacts that could track down the 7-port Distributor Cap that is used for the KLZE with external coil?
Re: KLZE 7-Post Distributor Cap?
Still trying to find that 7-Post Distributor cap...
Unless anyone knows how to wire an external coil straight through the old one?
Unless anyone knows how to wire an external coil straight through the old one?
Re: KLZE 7-Post Distributor Cap?
In case anyone was wondering what the JDM / AUS market disty-cap looks like.
- mx3_ryder
- Regular Member
- Posts: 371
- Joined: November 2nd, 2012, 8:40 am
- antispam: No
- Location: Troy, VT
Re: KLZE 7-Post Distributor Cap?
You really don't need a 7 post cap, as you can modify your 6 post with an MSD power tower
http://mx-3.com/phpBB3/viewtopic.php?f=23&t=26506
http://mx-3.com/phpBB3/viewtopic.php?f=23&t=26506
Re: KLZE 7-Post Distributor Cap?
The pictures don't work on that link, and I have yet to find any place that still sells the modified distributor caps.
The distributor cap is an off the shelf part in Australia, it would cost about the same as one here from Canadian Tire / Part Source... the b!#ch would be in the shipping and duty on it.
I just realised I have a friend living in Japan who might be able to hook me up, but if he can't, is there anyone around who happened to have bought their ZE and found an original disty cap on it?
The distributor cap is an off the shelf part in Australia, it would cost about the same as one here from Canadian Tire / Part Source... the b!#ch would be in the shipping and duty on it.
I just realised I have a friend living in Japan who might be able to hook me up, but if he can't, is there anyone around who happened to have bought their ZE and found an original disty cap on it?
Re: KLZE 7-Post Distributor Cap?
Also, is there any difference in K-series distributors between the 1.8/2.0/2.5 engines?
Found this one on ebay and I'd happily pay this price.
http://www.ebay.ca/itm/Blueprint-Distri ... c86&_uhb=1
Found this one on ebay and I'd happily pay this price.
http://www.ebay.ca/itm/Blueprint-Distri ... c86&_uhb=1
- mx3_ryder
- Regular Member
- Posts: 371
- Joined: November 2nd, 2012, 8:40 am
- antispam: No
- Location: Troy, VT
Re: KLZE 7-Post Distributor Cap?
I assume you tried the link at the top of page? Pics work for me. Anyways, I kick myself in the butt still for getting rid of my 7 post distributor that came on my straight neck ze as I would like to do the HEI mod in the near. I'm going to mod my cap like shown in the write up. As for k-series distributors, there are differences. What year is your car?
Re: KLZE 7-Post Distributor Cap?
I picked up two new ones on ebay UK for 50 USD shipped. just keep your eyes open and you can get a good deal.
PN:
ADM51429 Blueprint
Commercial Ignition XD363
here are a few other options:
http://www.ebay.co.uk/itm/92-99-MAZDA-X ... 3f2a29fd66
http://www.ebay.co.uk/itm/DISTRIBUTOR-C ... 589bb1ff82
PN:
ADM51429 Blueprint
Commercial Ignition XD363
here are a few other options:
http://www.ebay.co.uk/itm/92-99-MAZDA-X ... 3f2a29fd66
http://www.ebay.co.uk/itm/DISTRIBUTOR-C ... 589bb1ff82