Looking for Interest in Colt Cams

fowljesse · Post by **fowljesse** » January 25th, 2010, 1:52 am

I'd be into it for about $300 U.S. I could rob some more Suicide Girls.

solo_ryder · Post by **solo_ryder** » January 25th, 2010, 3:13 am

fowljesse wrote:I'd be into it for about $300 U.S. I could rob some more Suicide Girls.

What... ;D

radekkm · Post by **radekkm** » January 25th, 2010, 4:57 am

hi everybody,i come Poland,live in UK,but still not great english,sorry
thank you Daninski for help ones again
Will get the information from colt cams how much for set of triflow and how long it will take if they have 5-10 sets to do
Anyone who is 100% sure please declare on UKmx-3 forum,to have it clean and clear
thank you

_-Night-Shade-_ · Post by **_-Night-Shade-_** » January 25th, 2010, 10:18 am

radekkm wrote:hi everybody,i come Poland,live in UK,but still not great english,sorry
thank you Daninski for help ones again
Will get the information from colt cams how much for set of triflow and how long it will take if they have 5-10 sets to do
Anyone who is 100% sure please declare on UKmx-3 forum,to have it clean and clear
thank you

You're a Polish guy living in the UK? Are you one of these?

http://www.youtube.com/watch?v=Qpgp4DgnIug" onclick="window.open(this.href);return false;

radekkm · Post by **radekkm** » January 25th, 2010, 10:38 am

do you know what does it mean "kurwa"

that is me

http://www.youtube.com/watch?v=qWOuWc5BvQI" onclick="window.open(this.href);return false;

that is my mx-3

http://www.youtube.com/watch?v=5I1MwUOyEEI" onclick="window.open(this.href);return false;

and on nitrous and Mfactory LSD

http://www.youtube.com/watch?v=XAwtkiK8fUg" onclick="window.open(this.href);return false;

are you one of these http://www.youtube.com/watch?v=EsoY5yi5 ... re=related" onclick="window.open(this.href);return false;

or your polish is simular to this http://www.youtube.com/watch?v=CacFUmHQ ... re=related" onclick="window.open(this.href);return false;

_-Night-Shade-_ · Post by **_-Night-Shade-_** » January 25th, 2010, 10:48 am

Lmfao yes I know what kurwa means, I'm Ukrainian. Nice vids! Polish girls are the hottest ;D

MX3-4U2NV · Post by **MX3-4U2NV** » January 25th, 2010, 10:58 am

hey!

put your seatbelt on.

fowljesse · Post by **fowljesse** » January 25th, 2010, 9:43 pm

solo_ryder wrote:
fowljesse wrote:I'd be into it for about $300 U.S. I could rob some more Suicide Girls.
What... ;D

I did a fashion show with The Suicide Girls, and went for burgers after watching them change for a few hours. I found over $200 in a pile of coats when I got mine out. It obviously came from a certain purse, and when I found out whose it was, I kept a $50. In some fairness, she was just bragging that she made so much cash, that she didn't even know how much she had, and she wouldn't give me $5 for a burger

And I put the rest in her purse, and zipped it up. I asked her 5 times for the $5!

solo_ryder · Post by **solo_ryder** » January 25th, 2010, 9:49 pm

I need to start hanging out with you man..

fowljesse · Post by **fowljesse** » January 25th, 2010, 10:05 pm

If you come down before I leave, I'll give you a list of items needed to survive a night on the town.

Slammed6 · Post by **Slammed6** » January 26th, 2010, 9:32 am

I had purchased a set of COLT 218 Race grind cams, and I have run the COLT 210 Street grinds.

He can not use the K8 cams as regrinds, I didn't get into specifics with him, but he knows what a K8 cam is and say he cannot regrind them to the specs of the cams he offers.

I noticed very minimal gain with the 210 Street grinds over my KL-31 KLZE cams. From what I got the Street grind cams were intended as an alternative to the KLZE cams, and only suppose to be slightly stronger than KL-31 cams. I never dyno'd the difference.

The 218 Race grinds, definately moves your power band up to higher RPMS. I did dyno these cams but compared to a US KL-01 cam, They provided ~13 HP increase, but with no tuning and on a KL-01 motor. Just dropped them in and go. With tuning I don't see 20 HP out of the question.

radekkm · Post by **radekkm** » January 26th, 2010, 10:18 am

that is nice,i know that in KLZE the will not make the same increase,but COLT 218 Race grind cams with SMT6, polish and ported heads,intake manifold and 65 mm TB will do min 20hp +
come on guys,need just one person and we will deal

WhiteFinish · Post by **WhiteFinish** » January 26th, 2010, 2:44 pm

Last time on probetalk the tri-flows where 400

I haven't seen anybody who has done some dyno testing. I'm really curious for the results.

Anyway, when the price is decent (with shipping to europe) I'm in.

solo_ryder · Post by **solo_ryder** » January 26th, 2010, 3:09 pm

I'd really like to see some dyno plots of these cams and find out if the idle is comparable to a stock kl31 cammed car. Pt guys gotta get their butt into gear

radekkm · Post by **radekkm** » January 26th, 2010, 6:04 pm

WhiteFinish wrote:Last time on probetalk the tri-flows where 400

I haven't seen anybody who has done some dyno testing. I'm really curious for the results.

Anyway, when the price is decent (with shipping to europe) I'm in.

do you want me to add you to the list on uk-mx3 forum ??
what cams are you interested in ??

MX-3.com

Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams

Re: Looking for Interest in Colt Cams