solo_ryder wrote:Why would anyone with a mx want these?
with posts like these no wonder your post count is so high but u are still a beginner after all these years.
Ukrman wrote:you should get some pics of them on the mx3..... can't see much on that side shot
any rubbing or anything? need wheel spacers?
There are many pictures of the faces already so the important part is to show a fitment picture. Rubbing depends on how stiff your suspension is as well as camber and stretch.
the fronts clear with no spacers. my coilover shock body's are thicker than oem shocks so in the rear i used a 7mm spacer to clear the rear shocks with my coilovers and stock crash bolts.
With rear camber plates (not available in 2003) at negative + camber bolts at positive to get a good number for tire wear probably dont need spacer on the rears.
they should clear bbk as they are "bippu" style wheels.
this is my G. this is the look i was going for with the mx3 project until it got tossed on the back burner so im getting rid of some parts
![Image](http://www.armandpranadi.com/MR2/2010_01_30_WFC_Venice/content/bin/images/large/IMG_0305.jpg)