pheno spacers

96mx-3 · Post by **96mx-3** » June 15th, 2009, 1:22 pm

just a quick question i bought a set of spacers, but i have a de and there for a ze/// will this cause restriction at all when using the gaskets ?

WhiteFinish · Post by **WhiteFinish** » June 15th, 2009, 2:51 pm

Quick answer : yes

mitmaks · Post by **mitmaks** » June 15th, 2009, 8:51 pm

just port match them

Nd4SpdSe · Post by **Nd4SpdSe** » June 15th, 2009, 11:19 pm

He would be using ZE spacers on a DE, so no there would be no restriction since the square runners are larger than the rounded ones. You could port match the heads, but the IM would still be the round runners. The only thing with those spacers is that they probably block the EGR hole on the IM.

fowljesse · Post by **fowljesse** » June 15th, 2009, 11:43 pm

They would just cause minor tubulance, which may help the "swirl" when the gas and air mix. I would check to see if the DE oval ports are wider than the sqare ZE spacers, but I think they're the same.

muttpower · Post by **muttpower** » June 16th, 2009, 6:49 am

Just use your ze spacers as a stencil, and port your intake runners to match them...takes less than 1 hour....

MX-3.com

pheno spacers

pheno spacers

Re: pheno spacers

Re: pheno spacers

Re: pheno spacers

Re: pheno spacers

Re: pheno spacers