Adjustable Fuel Pressure Regulator Install

[ramsen25]

hey guys i need some help installing the adjustable fuel pressure regulator how my ZE can someone help thanks

[96mx-3]

there is a gas line that comes from under the IM on the right side..and it goes to your fuel rail ( stock fpr) remove the line ( after letting out the pressure) unbolt the stock fpr put on ur new adapter..with an oring.. then hook that line u unhooked into your "in" side on the afpr then put a line from the "out" side to the adapter... clamp them.. and start the car..and adjust the pressure to 45 i have been told and have read... ( put the vac line on too ) from the stock one to the only spot on the AFPR ... ta daa... search google..there all the same just different areas on diff cars..

[ramsen25]

k kool give her a shot thanku

[ramsen25]

where can i get the adapter to replace my stock fuel pressure regulator ?

[RS_OBD'oh_2]

it can be found in the search section

[Daninski]

Or you can simply disconnect the vac line and connect your AFPR before it.

[ramsen25]

i dont understand sorry

[96mx-3]

leave your stock FRP in place..and block that vaccume hole.. and jsut hook up the vac to the AFPR and install same way.. your kit didnt come with one ?

[ramsen25]

it didnt come with the adapter, will it still work if i leave the stock pressure regulator on i thought the gas has to go through the fuel rails

[96mx-3]

it does ? .... just run the line to your in from the back of the IM then run a line from the OUT to the stock fpr... it goes into the fuel rail ?

[ramsen25]

ohh kkk kool thanku