Where to buy shifter stabilizer bar bushings! ONLY 1 LEFT
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Where to buy shifter stabilizer bar bushings! ONLY 1 LEFT
Found a place online that has a supply of nyloil stabilizer bar bushings without having to wait for a bulk buy from club protege or mx6.com!
http://www.stagefourmotorsports.com/pro ... itemId=991" onclick="window.open(this.href);return false;
Ordering a set today!
THERE IS ONLY 1 SET LEFT AS OF RIGHT NOW, EMAIL THE OWNER TO VERIFY IF THEY ARE STILL IN STOCK! He also said that anyone who orders after that point will be given a refund!
http://www.stagefourmotorsports.com/pro ... itemId=991" onclick="window.open(this.href);return false;
Ordering a set today!
THERE IS ONLY 1 SET LEFT AS OF RIGHT NOW, EMAIL THE OWNER TO VERIFY IF THEY ARE STILL IN STOCK! He also said that anyone who orders after that point will be given a refund!
Last edited by onlytrueromeo on December 1st, 2008, 11:35 pm, edited 2 times in total.
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: I found where to buy shifter stabilizer bar bushings!
they are on the way.. thanx dude.
On a side note, you are sexy!
LOL
On a side note, you are sexy!
LOL
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: I found where to buy shifter stabilizer bar bushings!
I emailed to make sure they were in stock - the owner (Chris) said they were. Didn't ask how many sets there were. Hopefully they'll fit good! He said about a week for US customers, and 4 days for Canooks.
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: I found where to buy shifter stabilizer bar bushings!
Sweet, impulse buy
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: I found where to buy shifter stabilizer bar bushings!
I bet the owner of the company is happy I emailed him...lol
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: I found where to buy shifter stabilizer bar bushings!
ATTENTION!
THERE IS ONLY 1 SET LEFT - SOLO, MYSELF AND RS_OBD'OH_2 HAVE SETS AND THERE IS ONLY 1 SET OF THESE LEFT!
THERE IS ONLY 1 SET LEFT - SOLO, MYSELF AND RS_OBD'OH_2 HAVE SETS AND THERE IS ONLY 1 SET OF THESE LEFT!
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: Where to buy shifter stabilizer bar bushings! ONLY 1 LEFT
Good find! I've had a set on for about a year, and they still seem new. I just had them off last night.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: Where to buy shifter stabilizer bar bushings! ONLY 1 LEFT
Hello,
Yep we'll have 15 more sets coming in 3-4 weeks. We'll also have the
shifter linkage bushings at that time too (the ones that mount under
the shifter & at the other end of the shifter rod, next to the
stabilizer rod bushing). Those are NY4 on our website. We will have
15 sets of those coming in as well. Thanks!
--
Chris De Freitas
info@stagefourmotorsports.com" onclick="window.open(this.href);return false;
http://www.stagefourmotorsports.com" onclick="window.open(this.href);return false;
Re: Where to buy shifter stabilizer bar bushings! ONLY 1 LEFT
hey this may be dumb but just so im clear...this is for your shifter like the ball end where the other rod connects? ( you install short shifter for instance and u replace this bushing) ? lol i jsut dont wanna buy the wrong thing
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: Where to buy shifter stabilizer bar bushings! ONLY 1 LEFT
Nope, this is for the stabilizer bar - the bar that connects shifter to the upper part of the tranny that DOES NOT move. It is not for the rod that actually shifts gears. For those I would recommend bronze oil bushings from corksport. They will come with 4 in the pack - 2 for the shifter end and 2 for the end that connects to the tranny.
Re: Where to buy shifter stabilizer bar bushings! ONLY 1 LEFT
lol see i ask one dumb question and save my self 40bucks ..thanks
-
- Regular Member
- Posts: 156
- Joined: May 19th, 2005, 4:11 pm
- Location: The netherlands ( europe)
Re: Where to buy shifter stabilizer bar bushings! ONLY 1 LEFT
are those the same as the SRD bushing wich where always sold at corksport?
what do these do?
i recently installed that SRD bushing with the bronze oil bushings but found shifting a lot harder ( plus it feels like the shifter has play up and down)
what do these do?
i recently installed that SRD bushing with the bronze oil bushings but found shifting a lot harder ( plus it feels like the shifter has play up and down)
2.5L KLZE engine, CF hood, Postert frontbumper, kmax skirts, custom diffusor..
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: Where to buy shifter stabilizer bar bushings! ONLY 1 LEFT
did you install bronzoil bushings at where the linkage meets the tranny as well or just under the shifter?
when you say play up and down I assume when the shifter is in neutral you can move it up and down from say 1 to 2 with some play correct?
or do you mean up and down like in and out of the socket for the shifter?
when you say play up and down I assume when the shifter is in neutral you can move it up and down from say 1 to 2 with some play correct?
or do you mean up and down like in and out of the socket for the shifter?
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
-
- Regular Member
- Posts: 156
- Joined: May 19th, 2005, 4:11 pm
- Location: The netherlands ( europe)
Re: Where to buy shifter stabilizer bar bushings! ONLY 1 LEFT
it feels like it moves up and down ( like you mention in and out) but i am sure the big rubber thing around the shifter isnt ripped or that the bracket is looseMooneggs wrote:did you install bronzoil bushings at where the linkage meets the tranny as well or just under the shifter?
when you say play up and down I assume when the shifter is in neutral you can move it up and down from say 1 to 2 with some play correct?
or do you mean up and down like in and out of the socket for the shifter?
replaced the stock shifter with a pacesetter shifter, placed the bronze oil bushings in front and in the shifter itself and placed that SRD bushing at the end of the stabilisation rod for the shifter rod
when driving and expecially when the car is at temperature i sometimes have trouble getting it in other gears ( expecially from 3rd to 4th) i have the feeling something is heating up under there and expanding making shifting a bit harder
2.5L KLZE engine, CF hood, Postert frontbumper, kmax skirts, custom diffusor..
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102