What plugs in this sensor

Barambambase · Post by **Barambambase** » March 5th, 2008, 11:43 am

hello guys, i need some help figuring out what is this plug, I have no engine light on dash, but the mx won't pass smog test without a plug there. I have circled the area, there are 2 plugs in that area.

solo_ryder · Post by **solo_ryder** » March 5th, 2008, 11:44 am

No pic?

Barambambase · Post by **Barambambase** » March 5th, 2008, 11:45 am

trying to attach hehehehe, that was quicker than me figuring out how to attach pic

solo_ryder · Post by **solo_ryder** » March 5th, 2008, 11:46 am

Hahah, get the http:// address and put it between the IMG brackets when you press the IMG button

Barambambase · Post by **Barambambase** » March 5th, 2008, 11:52 am

http://s66.photobucket.com/albums/h256/ ... k8plug.jpg" onclick="window.open(this.href);return false; there is the link

solo_ryder · Post by **solo_ryder** » March 5th, 2008, 12:10 pm

Can you get a closer pic? That is either the coolant temp sensor or the crank angle sensor. Dont think your car will run without the crank angle sensor though

Barambambase · Post by **Barambambase** » March 5th, 2008, 12:17 pm

yes is something related to coolant, since is real close to that colant cap. is coming from the neck of the tube where cap is on. I have no engine light on. Where does that plugs to on the other side??

i can't get any closer pics, car is 40 mins away, i've been looking at peoples engine bays, but no close ups of that area, or picture links don't work.

Kirk95gs · Post by **Kirk95gs** » March 5th, 2008, 12:39 pm

I have this pic of when I did my swap. It might be to close, its of the k8.

http://i153.photobucket.com/albums/s204 ... 020073.jpg

Barambambase · Post by **Barambambase** » March 5th, 2008, 12:42 pm

yeah thats the one!

thanks a lot guys for quick response, where does the other end goes??

you think pepboys will have it, or just go straight to NAPA?

Kirk95gs · Post by **Kirk95gs** » March 5th, 2008, 12:49 pm

I dont really understand what you meanwhere does the other end go.. if you fallow the harness over from from behind the intake manifold to where the coolant sensor is. there is only a couple plugs. one is the knock sensor that goes between the heads. one is the crank angle sensor that fallows the oil dip stick down. One is coolant temp sensor. there might be a ground, I can't remember.

Barambambase · Post by **Barambambase** » March 5th, 2008, 1:07 pm

i think it has to be the coolant one. what i mean is if i buy the plug that goes to that coolant temp sensor, plug it in, where does the other end of plug go?

solo_ryder · Post by **solo_ryder** » March 5th, 2008, 1:19 pm

That is the knock sensor.

Barambambase · Post by **Barambambase** » March 5th, 2008, 2:23 pm

I will go take pictures in a few days.

Raven95150 · Post by **Raven95150** » March 5th, 2008, 9:13 pm

Here is your pic:

BTW, when using Photobucket or other photo hosting sites, they provide you with the IMG code, just copy and paste it.

Barambambase · Post by **Barambambase** » March 5th, 2008, 9:14 pm

thanks a lot man, i will try get a closer up picture of it, since that one is too general.

MX-3.com

What plugs in this sensor

What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor

Re: What plugs in this sensor