Miata Intake manifold

Campbell* · Post by Campbell* » February 20th, 2007, 10:28 pm

Iv searched and have had no luck with finding if it works. Im wondering if a 1.6 Miata intake manifold will work on a b6t head. If you could help me out that would be great.
thanks

lv2xlr8 · Post by **lv2xlr8** » February 21st, 2007, 3:18 pm

i dont know about the miata intake manifold, but i do know that you can use the head from the dohc b6 and its side mounted intake manifold.

Limegreen mx-3 · Post by **Limegreen mx-3** » February 21st, 2007, 4:21 pm

no it won't tryied it before but hey don't take my word for it try it urself

JWMotorsports · Post by **JWMotorsports** » February 21st, 2007, 4:35 pm

It needs to be modified to fit as the throttle body sits almost on the pass side shock tower. See my cardomain site pics to see what it takes to make it work.

Your best bet is the DOHC MX-3 cyl head with the matching intake manifold. That head is supposed to flow better than the B6T head anyway.

Campbell* · Post by Campbell* » February 24th, 2007, 10:00 am

thanks for the help guys, Iv decided to go with the B6 head swap once I can get my hands on one

monty73741 · Post by **monty73741** » February 26th, 2007, 2:22 pm

to my understanding the intake manifold will fit on the dohc 1.6l ....but the throttle body will be on the other side of the engine.

Campbell* · Post by Campbell* » February 26th, 2007, 10:42 pm

what cams are better to use? the b6t or the b6?

monty73741 · Post by **monty73741** » February 27th, 2007, 11:22 am

Campbell* wrote:what cams are better to use? the b6t or the b6?

I think the person to talk to about that would probally be jarid since he has a hybrid b6/b6t

jason