klze intake gasket

MX34M3 · Post by **MX34M3** » January 16th, 2007, 12:41 am

I need to replace the back heads intake gasket.......

is this just a stock part for any k-series? even with the curve neck intake mani??

thanks for any help

papa roached · Post by **papa roached** » January 16th, 2007, 12:52 am

just as long as you get a millenia one, the intake gasket needs to have the same shaped holes as the runners on ytour intake

mx3autozam · Post by **mx3autozam** » January 16th, 2007, 4:24 pm

ya go to Mazda and get Intake manifold gaskets for a 95 Millenia non S just tell them its a 2.5L v6 and when you get them double check that they are square and not oval.

MX34M3 · Post by **MX34M3** » January 16th, 2007, 4:50 pm

but will they match to the head?

dewthis · Post by **dewthis** » January 16th, 2007, 7:04 pm

I have a spare set of ZE IM gaskets. PM me if you want them.

papa roached · Post by **papa roached** » January 17th, 2007, 2:03 am

MX34M3 wrote:but will they match to the head?

yea as long as yours are KL31 square port heads they should, if they arent square you dont have a klze