Okay, I've been pouring over technical drawings and stuff from the FSM, and I think I've accounted for all the pieces in the kit linked
here. What I can't figure out are the "optional bushes," and some of their contents. It looks like the following key applies for the kit contents field:
B = Bushing - or anything made of poly, hence the 4B in the front LCA front bush - this is the bushing itself plus the "stopper" as it's described in the FSM. Also explains the 4B in the trailing arm front and rear - they cut the bushing in half so that each half is inserted from its own side, meeting in the middle.
T = Tube - the metal tube that gets driven through the bushing and makes contact with the locating/retaining bolt.
W = Washer - where used as a retainer or spacer, or to protect against abrasion from other hard parts.
S = ? WTF is S? I'm guessing it means "Shell" for the bracket that retains the rear bushing on the LCA, and bolts to the front crossmember. Best seen on page R018 of the online FSM in the lower left exploded diagram.
If all this is the case, and all my inferrence is correct, it would make the most sense for us to order all the stuff on the top part of
the table except the Control Arm Lower - Inner Rear Bush part SPF0953-70K, and order the part from the lower table, part SPF2415K instead. It looks like one of each does indeed get the whole job done, assuming all of the parts are correct and fit well.
If anyone wants to take the suicide plunge with me, I'll be ordering the following first thing tomorrow morning:
FRONT:
(1) SPF0952-80K - LCA Front Bush
(1)
SPF0953-70K - LCA Rear Bush
(1) SPF0903K - Stabilizer Endlink Bush Kit
(1) SPF0908-22K - Stabilizer Chassis Mount Bush (if available in 22mm size)
update - 22.8mm is the closest size. I'm going to try it and see if there's too much play. Other option is to get the 21.5mm and drill it out to 22mm.
REAR
(1) SPF1786K - Front Lateral Link Inner and Outer Bush
(1) SPF1787K - Rear Lateral Link Inner and Outer Bush
(1) SPF0907K - Trailing Arm Front Bush
(1) SPF0906K - Trailing Arm Rear Bush
(1) SPF1406-20K - Stabilizer Chassis Mount Bush
*will update tomorrow with prices in USD.
Total came to US$387.51. I don't have itemized prices yet, hope to soon.
I'm going to hold off on the 2nd SPF0903 Stabilizer Endlink Bush Kit for the rear. I think the whole car is only going to take 8 bushings, but we'll see. Ordering another one later is easier than sending one back.
Once I get the parts, I'll try to get everything installed quickly. If everything works, maybe we can get SuperPro to package all the above parts as a master kit and sell them to us at a bit of a cut rate, or can maybe at least get a group buy together from Global Performance on all the individual pieces. I'll inquire about that when I order tomorrow, unless someone already has. Speak soon or forever let me be embarrassed.