KLZE Parts

Vanished · Post by **Vanished** » September 15th, 2006, 6:04 pm

OK so i'm starting to replace some parts for my ZE

Are all the parts for a KLDE? Or are some KLZE specific? I'm talking about things like..

Pulleys
Gaskets
Plugs/Wires
Oil Filter
PVC Valve
Water Pump

JWMX3 · Post by **JWMX3** » September 15th, 2006, 6:38 pm

ZE intake manifold gaskets are square port, order them for a millenia

ZE plugs use the mx6/probe 4cyl plug i think(someone with a ze confirm this,?)

solo_ryder · Post by **solo_ryder** » September 15th, 2006, 6:41 pm

Yes there are for a probe 2.0L 93+ BKR5E NGK Vpowers I beleive.

hgallegos915 · Post by **hgallegos915** » September 15th, 2006, 9:33 pm

really? im using the k8 ones and drives fine

Vanished · Post by **Vanished** » September 16th, 2006, 3:28 am

k sweet thanks...

what about the other things

Devlin · Post by **Devlin** » September 16th, 2006, 10:02 am

everything else yes, just ask for it from an mx-6 v6

and what's the diff between the 4cyl and v6 plugs?
i'm using NGK V6 MX-6 ones...would there be any benefit of using the 4cyl ones?

mx3autozam · Post by **mx3autozam** » September 16th, 2006, 11:40 am

Deimos wrote:everything else yes, just ask for it from an mx-6 v6

and what's the diff between the 4cyl and v6 plugs?
i'm using NGK V6 MX-6 ones...would there be any benefit of using the 4cyl ones?

umm ya the 4cyl ones are the same as the k8 BKR5E-11...the mx6 ones are ZFRsomethinmg and tehre a bit longer. Some people ahve had issues with teh higher compression and the piston hitting the plug and closing the gap so they recomend the k8 ones but there the wrong heat range. so the ones to go with are BKR6E-11 Tahts what i sue and tahts what corksport sells as well

John

solo_ryder · Post by **solo_ryder** » September 16th, 2006, 4:21 pm

Yea my bad they are the BKR6E-11's I had 5's and they ran ok, but they are not the right heat range. So i got 6's