Problems with fuel management install

[Marlon]

got some Questions

what dose each wire do on the 4 wire tps off an auto(92-93)

what dose each wire do on the Distributor (theres 3)
is it ok to hook up a msd and my megasquirt all to the ignition switch

and can i just hook up the vac nipple off of the fpr to any vac line

what wire gets tapped for the msd 6 white wire

thanks hopefully i can get it running soon

[Marlon]

i need to know what each wire dose on the tps for the auto

theres 4 wires

black with brown
red with white
green with red
green with white

i think the black with brown is the ground
the green with red is the 5v
then not sure about the other 2

heres a pic of the wiring diagram
<img src="http://10.pichold.com/tpswith_text.jpg" alt=" - " />
thanks

<small>[ August 03, 2004, 07:33 PM: Message edited by: Marlon ]</small>

[Bochek]

sorry to bring up such a old topic, did this ever get compleated. im at the point where i need to know how to get the electronic advance working with the Distributor.

Bochek

[ryanlindenberg]

Ok here it goes:

Red/Green = +5 Volts
Green/White = Throttle %
Black/Brown = Ground
Red/White = Idle Switch

[Bochek]

Ok here it goes:

Red/Green = +5 Volts
Green/White = Throttle %
Black/Brown = Ground
Red/White = Idle Switch

where does it get the throttle % from? isnt the tps only a idle/cruse/wot switch?

Bochek

[Bochek]

also, i have the b6 sohc, so its going to be different then the dohc engine wiring harness. my manual doesnt show thoes colour wires and its too dark out to go look @ my car, so for now il take your word on it, i just need to know where it gets the signals and how this could be configured with MSnS-E

Bochek

[ryanlindenberg]

yea i don't know if your SOHC will be the same or not. colors should be similar i would think though.

anywho, it does send the throttle %, it shows up on my Haltech. I'm using a 95 TPS.

[Bochek]

ahh thats because of the 95 tps, so that means that the disty can not be getting that input from my setup, (no throttle % tps)

has anyone actually installed a msns on a b6?

Bochek

[ryanlindenberg]

there is a guy on this forum that says he has one installed... his name is Custommx3...may be the same guy as on here probably not on a SOHC but at least he could help with some of the MS&S stuff.


http://www.mp3car.com/vbulletin/showthread.php?t=65821

[Bochek]

your link goes to a ebay ad for a twin loop muffler

[ryanlindenberg]

sorry, fixed it!

[MechaManZero]

green and white is def going to the green and white wir on the VAF. Rock on

[Bochek]

you guys are deffenlty talking doch wiring harness here.

Bochek