[FS] Some Garage Stuff/grill/foglight switch - ontario

sk8erdude28 · Post by **sk8erdude28** » July 1st, 2006, 4:17 pm

I got a jack for sale. Its in VERY good condition. Wasn't used that much. Lisfts to (I beleive) 15 or so inches.) Great thing to have around the house. Just upgraded to a bigger one. Looks good, made my Michelin. Blue in color, no dents or big scratches or anything. Works like new. Asking 25 bucks.

Also got a yellow Engine stand. I duno what to say. It's an engine stand. Asking 40 buicks. If you take it, you have to take the block that's on it. It's free!

Also have one foglight switch for sale. SOLD!

Also have one red GT grill. Asking 30 shipped.

TREVO123 · Post by **TREVO123** » July 1st, 2006, 4:42 pm

what engine block is it?

Nd4SpdSe · Post by **Nd4SpdSe** » July 1st, 2006, 4:48 pm

Will the switch work in the 92-93 style dashes? If so i could meet you at the Team SlipStream meet in whitby (at the AMC off of Thickson) this Tursday. Reason why I ask is that i got one from an mx-6, which I was told works, but too short shorter, and would only fit in the 94+ dashes i assume.

Bochek · Post by **Bochek** » July 1st, 2006, 4:52 pm

il give you 20 for the enginestand, il pick it up, let me know.

oh and just wondering, what engine in on the stand? b6?

Bochek

sk8erdude28 · Post by **sk8erdude28** » July 1st, 2006, 5:33 pm

The engine on the stand is a BP.

Let me clarify. If you buy it, you only get the block, and the crank - maybe the pan if you really want it.

Bochek - I'm VERY sorry. I obviopusly wasn't paying attention when I made the post, as I would like 40 bucks for the stand and engine combination. Feel free to PM me, if you want to work something out. I will sell the stand for 20 bucks to you if someone else wants to buy the block, I doin't want it staying here. It's no use to me.

nd4spd - 92 style MX3 dash I assume? To tell you the truth, I'm not too sure. I just emasured it, and it's about 1 3/4 inches deep. Hopefully that helps? THis is just the switch, unfortunately when I got it, I dind't have a knife so I couldn't get any of the wiring harness for it.

Bochek · Post by **Bochek** » July 1st, 2006, 5:53 pm

Bochek - I'm VERY sorry. I obviopusly wasn't paying attention when I made the post, as I would like 40 bucks for the stand and engine combination. Feel free to PM me, if you want to work something out. I will sell the stand for 20 bucks to you if someone else wants to buy the block, I doin't want it staying here. It's no use to me.

ahh its ok, i thought it was too good to be true, no big deal.

gl selling it.

Bochek

Bochek · Post by **Bochek** » July 1st, 2006, 10:45 pm

is the block just a block/crank or does it have rods and pistons too?

Bochek

sk8erdude28 · Post by **sk8erdude28** » July 1st, 2006, 10:55 pm

Bochek wrote:is the block just a block/crank or does it have rods and pistons too?

Bochek

Its the block/crank on the stand. I have the rods and pistons, they are in a drawer

For an extra 15 bucks you can have the rods and pistons too. They're no use to me.

Nd4SpdSe · Post by **Nd4SpdSe** » July 1st, 2006, 11:16 pm

sk8erdude28 wrote:nd4spd - 92 style MX3 dash I assume? To tell you the truth, I'm not too sure. I just emasured it, and it's about 1 3/4 inches deep. Hopefully that helps? THis is just the switch, unfortunately when I got it, I dind't have a knife so I couldn't get any of the wiring harness for it.

Sorry, not the depth but the height. It you have a 92-93 MX- 3 and it fit in yours, than it's the one I need. Since it doesn't have any harness I'll have hack something up. I'll offer $10 for it but I'll pick it up.

sk8erdude28 · Post by **sk8erdude28** » July 1st, 2006, 11:20 pm

Nd4SpdSe wrote:
sk8erdude28 wrote:nd4spd - 92 style MX3 dash I assume? To tell you the truth, I'm not too sure. I just emasured it, and it's about 1 3/4 inches deep. Hopefully that helps? THis is just the switch, unfortunately when I got it, I dind't have a knife so I couldn't get any of the wiring harness for it.
Sorry, not the depth but the height. It you have a 92-93 MX- 3 and it fit in yours, than it's the one I need. Since it doesn't have any harness I'll have hack something up. I'll offer $10 for it but I'll pick it up.

This was out of an Escort GT. Not sure if it's the same as the 92 style. But, someone else already sent payment for it. I might have another one soon. If I do, I'll PM you.

fieromx3 · Post by **fieromx3** » July 2nd, 2006, 1:43 am

that engine stand is pretty nice its definitly worth the 20 bux...got the same one myself used it for my kl-de rebuild.

Matt · Post by **Matt** » July 2nd, 2006, 12:06 pm

$50 for the engine stand and the floor jack. I am in kitchener now. we meet somewhere?

Steeb · Post by **Steeb** » July 2nd, 2006, 9:43 pm

25 for an engine stand! thats a freakin steal

sk8erdude28 · Post by **sk8erdude28** » July 3rd, 2006, 10:11 am

Matt wrote:$50 for the engine stand and the floor jack. I am in kitchener now. we meet somewhere?

No. I have no way of transporting the stand. That's why you come here and take it. Remember, you take the engine too!

Not sure if you guys read my second post. The price was a typo on my retarded behalf on that. I wanted 40 bucks for the stand and block. Still a good deal. I forgot to edit my first post

Matt - if you come pick up this stuff, 60 bucks and it's yours for the stand and jack.

sk8erdude28 · Post by **sk8erdude28** » July 6th, 2006, 6:40 pm

bump, come on, want this stuff gone soon.