I got a jack for sale. Its in VERY good condition. Wasn't used that much. Lisfts to (I beleive) 15 or so inches.) Great thing to have around the house. Just upgraded to a bigger one. Looks good, made my Michelin. Blue in color, no dents or big scratches or anything. Works like new. Asking 25 bucks.
Also got a yellow Engine stand. I duno what to say. It's an engine stand. Asking 40 buicks. If you take it, you have to take the block that's on it. It's free!
Also have one foglight switch for sale. SOLD!
Also have one red GT grill. Asking 30 shipped.
Last edited by sk8erdude28 on July 3rd, 2006, 10:11 am, edited 2 times in total.
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L. http://www.cardomain.com/ride/2189811
Will the switch work in the 92-93 style dashes? If so i could meet you at the Team SlipStream meet in whitby (at the AMC off of Thickson) this Tursday. Reason why I ask is that i got one from an mx-6, which I was told works, but too short shorter, and would only fit in the 94+ dashes i assume.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired) 2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18 2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500) 2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar 2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Let me clarify. If you buy it, you only get the block, and the crank - maybe the pan if you really want it.
Bochek - I'm VERY sorry. I obviopusly wasn't paying attention when I made the post, as I would like 40 bucks for the stand and engine combination. Feel free to PM me, if you want to work something out. I will sell the stand for 20 bucks to you if someone else wants to buy the block, I doin't want it staying here. It's no use to me.
nd4spd - 92 style MX3 dash I assume? To tell you the truth, I'm not too sure. I just emasured it, and it's about 1 3/4 inches deep. Hopefully that helps? THis is just the switch, unfortunately when I got it, I dind't have a knife so I couldn't get any of the wiring harness for it.
Bochek - I'm VERY sorry. I obviopusly wasn't paying attention when I made the post, as I would like 40 bucks for the stand and engine combination. Feel free to PM me, if you want to work something out. I will sell the stand for 20 bucks to you if someone else wants to buy the block, I doin't want it staying here. It's no use to me.
ahh its ok, i thought it was too good to be true, no big deal.
sk8erdude28 wrote:nd4spd - 92 style MX3 dash I assume? To tell you the truth, I'm not too sure. I just emasured it, and it's about 1 3/4 inches deep. Hopefully that helps? THis is just the switch, unfortunately when I got it, I dind't have a knife so I couldn't get any of the wiring harness for it.
Sorry, not the depth but the height. It you have a 92-93 MX- 3 and it fit in yours, than it's the one I need. Since it doesn't have any harness I'll have hack something up. I'll offer $10 for it but I'll pick it up.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired) 2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18 2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500) 2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar 2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
sk8erdude28 wrote:nd4spd - 92 style MX3 dash I assume? To tell you the truth, I'm not too sure. I just emasured it, and it's about 1 3/4 inches deep. Hopefully that helps? THis is just the switch, unfortunately when I got it, I dind't have a knife so I couldn't get any of the wiring harness for it.
Sorry, not the depth but the height. It you have a 92-93 MX- 3 and it fit in yours, than it's the one I need. Since it doesn't have any harness I'll have hack something up. I'll offer $10 for it but I'll pick it up.
This was out of an Escort GT. Not sure if it's the same as the 92 style. But, someone else already sent payment for it. I might have another one soon. If I do, I'll PM you.
Matt wrote:$50 for the engine stand and the floor jack. I am in kitchener now. we meet somewhere?
No. I have no way of transporting the stand. That's why you come here and take it. Remember, you take the engine too!
Not sure if you guys read my second post. The price was a typo on my retarded behalf on that. I wanted 40 bucks for the stand and block. Still a good deal. I forgot to edit my first post
Matt - if you come pick up this stuff, 60 bucks and it's yours for the stand and jack.