KLZE DISTRIBUTOR CAP
KLZE DISTRIBUTOR CAP
I am wondering if there is a special code for the ze distributor cap and rotor...
do I tell the guys at the parts desk I want a K8 distributor cap and rotor or a kl03 distributor cap
I am in canada, no mazda dealer out here even knows bout the KL31..
do I tell the guys at the parts desk I want a K8 distributor cap and rotor or a kl03 distributor cap
I am in canada, no mazda dealer out here even knows bout the KL31..
![Image](http://i126.photobucket.com/albums/p107/kp2t23/P1030419.jpg)
![Image](http://i126.photobucket.com/albums/p107/kp2t23/P1040162.jpg)
![Image](http://i126.photobucket.com/albums/p107/kp2t23/reworked.jpg)
![Image](http://i126.photobucket.com/albums/p107/kp2t23/P1030502.jpg)
![Image](http://i126.photobucket.com/albums/p107/kp2t23/P1040147.jpg)
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
doesnt the ze disty use an outside coil and has 5 plugs?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
ze disty came with both 6 nipple and 7 nipple for external coil
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
-
- Regular Member
- Posts: 143
- Joined: October 13th, 2002, 2:01 am
- Location: Nederlands
The klze disty with 6 nippels comes from the eunos800 and doesn't work on an obd1, I have tried it.
Bastian
Bastian
17 inch bba racings rims, apex lowering springs, laser muffler, boost steering wheel, mazdaspeed seats, black altezza's, testpipe, oh and a polished klze with an upgraded clutch and a kl36 ecu.
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
you sure about that ? I would assum the 7 nipple disty came in the eunos800 (millenia) since they had an external coil and a maf. bUt I could be wrong thoughBlack Magic wrote:The klze disty with 6 nippels comes from the eunos800 and doesn't work on an obd1, I have tried it.
Bastian
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
Sorry to hijack the thread, but i've got a ZE and have gone through 2 kl-01 disty's (K8 ones) in the last week!! Coils went bad on both of them! My ZE came from a eunos800 with a kf-34 disty attached which i assume works ok. Anyone know how i can MAKE it work on our cars? I think there's a difference in the wiring of the 3 pin plug but have been unable to find any info on here.
Any help would be appreciated.
Any help would be appreciated.
-
- Regular Member
- Posts: 677
- Joined: July 24th, 2002, 2:01 am
- Location: Calgary