PICTURES OF TURBO MX3 PROJECT
-
- Regular Member
- Posts: 341
- Joined: December 17th, 2001, 2:01 am
- Location: Bridgetown, Barbados
- Contact:
PICTURES OF TURBO MX3 PROJECT
Hi Folks,
Here are the updated pictures of my turbocharged Mazda MX3 1.6 DOHC vehicle. Hopefully it will encourage more people to consider going the turbo route.
Let me know that you think.
http://www.cardomain.com/member_pages/view_page.pl?page_id=310985
Here are the updated pictures of my turbocharged Mazda MX3 1.6 DOHC vehicle. Hopefully it will encourage more people to consider going the turbo route.
Let me know that you think.
http://www.cardomain.com/member_pages/view_page.pl?page_id=310985
JSpec Turbo MX3 (1.6 DOHC)
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
-
- Regular Member
- Posts: 341
- Joined: December 17th, 2001, 2:01 am
- Location: Bridgetown, Barbados
- Contact:
Re: PICTURES OF TURBO MX3 PROJECT
Just recently got hold of a Nissan Skyline GTS intercooler that I am going to try to mount this week to see if I can replace the stock 323 GTX IC that I am currently using.
The Skyline GTS IC is a much more efficient IC and should help with cooling for the times when I am at 10psi as well as provide cooler temps overalls.
Will keep you updated.
The Skyline GTS IC is a much more efficient IC and should help with cooling for the times when I am at 10psi as well as provide cooler temps overalls.
Will keep you updated.
JSpec Turbo MX3 (1.6 DOHC)
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
-
- Regular Member
- Posts: 341
- Joined: December 17th, 2001, 2:01 am
- Location: Bridgetown, Barbados
- Contact:
Re: PICTURES OF TURBO MX3 PROJECT
Turns out the Skyline IC is a bit too thick to fit as a FMIC on the MX3 so I will look at possibly getting one of the thinner Spearco models that you see being used on many turbo projects.
JSpec Turbo MX3 (1.6 DOHC)
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
-
- Regular Member
- Posts: 779
- Joined: July 3rd, 2003, 2:01 am
- Location: Barrie, Ontario, Canada
- Contact:
Re: PICTURES OF TURBO MX3 PROJECT
Nice setup mate. However, the Pakfeifer spoiler you got there just looks too funny without a full body kit .
-
- Regular Member
- Posts: 54
- Joined: December 18th, 2003, 2:01 am
- Location: UK Manchester
- Contact:
Re: PICTURES OF TURBO MX3 PROJECT
Just chatting to my mate, and we were wondering what extra power you get out of the turbo and is it worth going down the route of sticking a turbo/Super charger on my stock 1.8 V6. I have done nothing so far and wondering how to make things more fun, without doing the KLZE engine swap.
Re: PICTURES OF TURBO MX3 PROJECT
I agree with Quick Silver, but overall it's a very tastefully done MX-3. Nicely done.
-Mark Lathrop
1992 MX-3 RS-T
B6T with some goodies
"...I told those fudgepackers I liked Michael Bolton's music..."
1992 MX-3 RS-T
B6T with some goodies
"...I told those fudgepackers I liked Michael Bolton's music..."
-
- Regular Member
- Posts: 341
- Joined: December 17th, 2001, 2:01 am
- Location: Bridgetown, Barbados
- Contact:
Re: PICTURES OF TURBO MX3 PROJECT
Thanks for the feedback so far.
I am hoping to borrow a GTech Competition speed meter from a friend over the weekend to perform some 1/4mile runs on the vehicle to see how it is performing.
I am hoping to borrow a GTech Competition speed meter from a friend over the weekend to perform some 1/4mile runs on the vehicle to see how it is performing.
JSpec Turbo MX3 (1.6 DOHC)
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
-
- Regular Member
- Posts: 316
- Joined: May 27th, 2002, 2:01 am
- Location: Cape Carteret, North Carolina
- Contact:
Re: PICTURES OF TURBO MX3 PROJECT
Hey man, looks good so far..But You need to clean up that engine bay man! Looks sooo dirrrrty! little bit of foamy brite, armorall, and some paint!
1994 Mazda MX-3 RS (Project RS-T)
Re: PICTURES OF TURBO MX3 PROJECT
Sweet bro, luv it, luv to see more guys adding some boost to their 4 bangers, im planning mone soon I hope thi ssummer!
Peace and keep it up
Peace and keep it up
Derek Van Horne MX-3.com Member # 33
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
-
- Regular Member
- Posts: 341
- Joined: December 17th, 2001, 2:01 am
- Location: Bridgetown, Barbados
- Contact:
Re: PICTURES OF TURBO MX3 PROJECT
Do you guys know of any other injectors that will work with the stock MX3 ECU that are larger than the 1.8 Miata ones that I am currently using?
Maybe I should just bite the bullet and get the S-AFC 2 and some RC 370cc injectors.
Please advise guys.
1994 MX3 1.6 DOHC (@9psi)
Maybe I should just bite the bullet and get the S-AFC 2 and some RC 370cc injectors.
Please advise guys.
1994 MX3 1.6 DOHC (@9psi)
JSpec Turbo MX3 (1.6 DOHC)
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
Re: PICTURES OF TURBO MX3 PROJECT
Derek,
where did you get the wrap around spoiler?
-Val
<small>[ February 09, 2004, 01:08 AM: Message edited by: valenzul ]</small>
where did you get the wrap around spoiler?
-Val
<small>[ February 09, 2004, 01:08 AM: Message edited by: valenzul ]</small>
Re: PICTURES OF TURBO MX3 PROJECT
JOrdon (airjordon) last yearOriginally posted by valenzul:
Derek,
where did you get the wrap around spoiler?
-Val
Derek Van Horne MX-3.com Member # 33
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
Re: PICTURES OF TURBO MX3 PROJECT
DVH, huh?
Jordon? Im not understanding what you posted.
I've got the supra spoiler and would like to see if I can get that same wraparoung spoiler. It looks more lowkey.
-thanks
Jordon? Im not understanding what you posted.
I've got the supra spoiler and would like to see if I can get that same wraparoung spoiler. It looks more lowkey.
-thanks
Re: PICTURES OF TURBO MX3 PROJECT
Jordon is a person on this board...i gave him my FX spoiler and he gave me the wrap around spoiler..sorry for the confusionOriginally posted by valenzul:
DVH, huh?
Jordon? Im not understanding what you posted.
I've got the supra spoiler and would like to see if I can get that same wraparoung spoiler. It looks more lowkey.
-thanks
Derek Van Horne MX-3.com Member # 33
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4