OBX SSAutochrome Street-Import Headers on a K8
OBX SSAutochrome Street-Import Headers on a K8
Hey now im really qurious if anyone have tryed to fit theese Headers on a normal little K8 MX-3 And what your impressions is of them performancewise (Low/Mid/High) RPM's...
I really want a set of Headers,But since every damb dyno of theese Headers is of either a KL-DE or a KL-ZE i have NO idea how they will perform on the little 1.8
I guess the K8 is just not worth enough so that any firm want to spend the mony on a dyno for it..
And i dont think the dyno's can be transferred to the K8 because the 2.5Liters simply must have a lot more exhaustflow/gasses going through the pipes
I really want a set of Headers,But since every damb dyno of theese Headers is of either a KL-DE or a KL-ZE i have NO idea how they will perform on the little 1.8
I guess the K8 is just not worth enough so that any firm want to spend the mony on a dyno for it..
And i dont think the dyno's can be transferred to the K8 because the 2.5Liters simply must have a lot more exhaustflow/gasses going through the pipes
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: OBX SSAutochrome Street-Import Headers on a K8
CorkSport has a dyno on thier site, but it showed crappy results. The top plot is when they completely removed the exhaust. The middle one is with the stock exhaust still, but with the headers installed, and the lower one stock exhaust manifold.
<img src="http://www.corksport.com/content/00/01/ ... ojdyn2.jpg" alt=" - " />
They did alot better when they installed the Mazdaspeed catback exhaust.
<img src="http://www.corksport.com/content/00/01/ ... ojdyn2.jpg" alt=" - " />
They did alot better when they installed the Mazdaspeed catback exhaust.
Re: OBX SSAutochrome Street-Import Headers on a K8
Yeah but that dyno is on a set of Hurricaneheaders or something like that if i remember correctly...
All the ones i asked about "they are the same" are the Hotshot-style copycats,and thats just the style thats supposed to give good allround gains,On a 2.5l that is
All the ones i asked about "they are the same" are the Hotshot-style copycats,and thats just the style thats supposed to give good allround gains,On a 2.5l that is
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
- bmwm3guy
- Regular Member
- Posts: 1066
- Joined: March 7th, 2004, 2:01 am
- Location: Gatineau, QC
- Contact:
Re: OBX SSAutochrome Street-Import Headers on a K8
too bad Pat form PSItuning.ca (old street-import) doesnt carry the OBX headers anymore. I think he mentionned getting the real Hotshot's but Ill let him confirm that. Either way we're out of luck for any affordable headers.
- JWMX3
- Senior Member
- Posts: 2060
- Joined: March 23rd, 2004, 2:01 am
- Location: Grassie, Ontario
- Contact:
Re: OBX SSAutochrome Street-Import Headers on a K8
but the hotshot knockoffs are affordable (at psituning.com) arent those any good ?
94' Mx3 GS 0-60 in 7.53s [5 spd conversion / Rebuilt 2.5 KL]
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: OBX SSAutochrome Street-Import Headers on a K8
yes they are good...but he doesn't carry them anymoreOriginally posted by JWMX3:
but the hotshot knockoffs are affordable (at psituning.com) arent those any good ?
<small>[ November 09, 2004, 12:21 PM: Message edited by: babyblueMX3 ]</small>
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
Re: OBX SSAutochrome Street-Import Headers on a K8
So anyone know of a place besides psi-tuning that has thoose headers??
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: OBX SSAutochrome Street-Import Headers on a K8
maybe ssautochrome themselves
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
Re: OBX SSAutochrome Street-Import Headers on a K8
Ebay has them. If you cant find them under mx3 try mx6 or probe. Here is a set of them
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7933016371&category=33631&sspagename=WDVW
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7933016371&category=33631&sspagename=WDVW
Re: OBX SSAutochrome Street-Import Headers on a K8
I know i said OBX in the discription,but i have heard that OBX arent that good compaired to the SSAutochrome and that they should have a shi-tty sound to them...Anyone know if theres any thruth to this??
Allso im not quite sure if the OBX Headers will fit flawlessly on a MX-3 without having to cut and weld the headers to get them to fit probertly,and the fact that theyre 100$ more expensive
Allso im not quite sure if the OBX Headers will fit flawlessly on a MX-3 without having to cut and weld the headers to get them to fit probertly,and the fact that theyre 100$ more expensive
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: OBX SSAutochrome Street-Import Headers on a K8
i got my headers from streetimports. they pwn j00
soundclips are on probetalk and I think i posted them on here a few weeks back if you care
soundclips are on probetalk and I think i posted them on here a few weeks back if you care
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
Re: OBX SSAutochrome Street-Import Headers on a K8
just had a set of the ss auto chrome headers installed today along with an unorthodox racing flywheel and act clutch. i am still running stock exhaust from the cat back. was raining tonight, so i could not really do much, but the car seems to have a good bit more power. not sure if it is from the headers or the flywheel. on the ss auto chrome headers you will have to do a good bit of bending to get the included j pipe to fit. does not look like the company is making direct fit headers--i had to purchase probe headers. also, the down pipe is longer than stock, so you will have to cut the cat back area down about 7 inches and relocate your resonator. the headers are really top drawer. beautiful welds and nice stainless steel. just don't try to get in touch with the manufacturer with any questions. no phone and they don't respond to emails unless you are placing an order. with the above mods plus denso iridium plugs, my car feels like a much better performer than when i bought it a month ago. good luck.
-
- Regular Member
- Posts: 528
- Joined: January 23rd, 2004, 2:01 am
- Location: East Grand Forks, MN
Re: OBX SSAutochrome Street-Import Headers on a K8
They change the sound of your car. I bought the headers knowing that they will benifit the KL-ZE more. But I installed them on the K8 too. They do a little. Thats the seat of the pants dyno.. It is quite obvious that they flow better than stock, being that they are tubular, and give the scavanging effect. They also look alot better. You can't loose with the price though. You do have to modify them some, but it is worth it.
THIS USER HAS BEEN BANNED, DO NOT DEAL WITH HIM. - MX-3.com Admin
Re: OBX SSAutochrome Street-Import Headers on a K8
I have seen and heard the soundclips from Streetimport headers, BUT they no longer have them,they just sold out the stock while still having them in their online catalogue
If i had known theyre were going to drop them so quickly i would have ordered a set right away,but thought i would wait untill i had the time to put them in
The modding you guys are talking about is still only that the cat needs to be moved backwards and nothing else..Right??
If i had known theyre were going to drop them so quickly i would have ordered a set right away,but thought i would wait untill i had the time to put them in
The modding you guys are talking about is still only that the cat needs to be moved backwards and nothing else..Right??
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: OBX SSAutochrome Street-Import Headers on a K8
yes it's the only mod you have to do with the 2g obx..oh maybe change the crappy bolt they give with it too and gaskets..this is no based on a personal experience but friend's experience
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)