stop the codes!!
- DJester187
- Regular Member
- Posts: 210
- Joined: June 2nd, 2004, 2:01 am
- Location: NY
stop the codes!!
could someone please tell me how to stop codes 2,5,10,16,24,69 from messing up my engine! I'm stalling out!
Electric Black '93 MX-3 GSR, Curved neck KLZE, KL36 ecu, Outlaw Engineering Thermal Spacers, Custom CAI, Carbon Fiber Invader Style hood, 2.25" straight pipe exhaust, custom muffler, lowered 1.8", and a set of 17" Exel DL-46's. With more to come once I get some $$$....
-
- Regular Member
- Posts: 67
- Joined: September 11th, 2003, 2:01 am
- Location: Nova Scotia, Canada
Re: stop the codes!!
You have to find out what each code is for and then try and fix it accordingly. I dont know what the codes are but there is a post somewhere on here explaining what each code is. Thats about all I can suggest
Re: stop the codes!!
In the above order:Originally posted by DJester187:
could someone please tell me how to stop codes 2,5,10,16,24,69 from messing up my engine! I'm stalling out!
Crank Angle Sensor 2
Knock Sensor
Intake Air Thermosensor
EGR Position Sensor
Feedback Sensor (Right Side)
Water Cooling Fan Relay
Can they all be wrong? Maybe its a general electrical fault - check the alternator output.
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
- DJester187
- Regular Member
- Posts: 210
- Joined: June 2nd, 2004, 2:01 am
- Location: NY
Re: stop the codes!!
i thought the same thing when i saw all those codes, i do have like 5 or 6 clips for sensors that i have no where to plug them into, any ideas?
Electric Black '93 MX-3 GSR, Curved neck KLZE, KL36 ecu, Outlaw Engineering Thermal Spacers, Custom CAI, Carbon Fiber Invader Style hood, 2.25" straight pipe exhaust, custom muffler, lowered 1.8", and a set of 17" Exel DL-46's. With more to come once I get some $$$....
Re: stop the codes!!
Was it always like that? Try to find any sensors in the general area of the clips locations. Process of elimination.Originally posted by DJester187:
i thought the same thing when i saw all those codes, i do have like 5 or 6 clips for sensors that i have no where to plug them into, any ideas?
92 GS
'Stock'...
'Stock'...
- DJester187
- Regular Member
- Posts: 210
- Joined: June 2nd, 2004, 2:01 am
- Location: NY
Re: stop the codes!!
believe me there are no mates for the clips, do i need to put my k08 manifold onto this enige so that i can hook up these sensors?!?!
Electric Black '93 MX-3 GSR, Curved neck KLZE, KL36 ecu, Outlaw Engineering Thermal Spacers, Custom CAI, Carbon Fiber Invader Style hood, 2.25" straight pipe exhaust, custom muffler, lowered 1.8", and a set of 17" Exel DL-46's. With more to come once I get some $$$....