MX-3.com

haha i hope itsnot!...3 more hours till PCV valve time!

only happens when the engine is hot too...if its cold drives around fine :\ part soruce has some pcv valves in stokc so i'll try that and the TB adjustment again after work

edit: i don't even know how to sort through an electrical issue.... i've added grounding wires everywhere too...

well i reset the ecu...and added a ground wire to the alternator.... and its now WORSE haha -_-; it used to bounce ~3 times every time i came to a stop....but now it just bounces a lot... i'm going to buy a new PCV valve and try to take the intake off and play with the butterfly valve on the TB and ...

any suggestions? its driving me nuts!

yea i did the sensor with feeler gauges and a multimeter

actually this is a stupid question... but which one is the PCV valve the red or the green... i checked the red one... cause that actually looked like the picture of the valve here: http://mx-3.com/manuals/showimg.php?file=/1995%20Workshop%20Manual/F1/F1-129.gif" onclick="window.open(this.h...

i checked the PCV valve as per the manual (blowing through ends etc to check - it tasted gross)
checked out fine?

I've read through a bajillion posts on what this could be. things i've done to date is: 1) check for vacuum leaks, replaced with a CAI, sprayed lines with TB cleaner, checks out fine 2) added grounding wires daisychained (was told toa dd one to alternator but haven't done this yet) 3)replaced TB, IA...

my starter is acting up, looking for a starter ASAP!

located in toronto ontario

yea i bought the one from autopartsway.... i'll install this weekend and keep you updated as for adjusting idle...the idle has been adjusted a billion times hahaha even my mechanic thinks its a devil car... haha like the idle sits at 1k but when it heats up it drops to 500... but this only happens i...

I have a 94 RS DOHC, i want to replace this coolant temperature sensor: http://mx-3.com/manuals/showimg.php?file=/1995%20Workshop%20Manual/F1/F1-162.gif" onclick="window.open(this.href);return false; as my idle drops very low when the car gets hot What is the part # that i should get off r...

Limegreen mx-3 wrote:ur ac will bolt up to the bp i had it bolted up but when i had a ac system it never work

you mean it should work but your AC was broken?

has anyone done a BP swap and managed to use their old B6 AC?

My mx-3 came without rear speakers... does anyone have a pic of their rear speaker....i cant seem to find a way to mount the 6.5 inch speaker...

Seller has given me this picture, says its a swapped out jdm miata engine. The block has "b55" on the side and on the valve cover it has some japanese lettering. Is this the jdm b6ze 120hp engine from a miata? I'm guessing it was possible that he swapped valve covers... is there any way to...