Page 1 of 1
wytbishops endlinks and bushing and what ever else? help
Posted: May 19th, 2012, 7:33 pm
by driftfan3
this has got to be the dumbs s@$^ to ask i look one here and i dont see any info on this in detail who is wytbishops and how do i get stuff from him cus i have need of poly bushing, adj endlinks and some other stuff
Re: wytbishops endlinks and bushing and what ever else? help
Posted: May 19th, 2012, 8:44 pm
by wytbishop
Wytbushings sadly, will never be seen again. I left the mold with the company that poured the parts for me on the last run a nd they have informed me that it is gone.
The adjustable enlinks are easy enough to make yourself although in my opinion OEM is the best option. There is no tangible gain from the end links and they are clicky and expensive.
Re: wytbishops endlinks and bushing and what ever else? help
Posted: May 20th, 2012, 11:29 pm
by SBR
Most of the bushings are still made by Whiteline. Roughly same prices too.
Re: wytbishops endlinks and bushing and what ever else? help
Posted: June 27th, 2012, 12:50 pm
by driftfan3
thank you both of you
Re: wytbishops endlinks and bushing and what ever else? help
Posted: June 27th, 2012, 7:49 pm
by onlytrueromeo
Charlie, how hard is it to make the molds? I have not installed my set since I have not worked on my car since I moved :-/.
Re: wytbishops endlinks and bushing and what ever else? help
Posted: June 28th, 2012, 12:48 am
by wytbishop
The mold cost about $2300CAD IIRC. It was machined from aluminum on a 5 axis mill. It could be recreated but the cost is too high and I can't get the interest as it is.
Re: wytbishops endlinks and bushing and what ever else? help
Posted: July 9th, 2012, 1:47 am
by SBR
Energy Suspension has control arm bushings for the Escort ZX2. May possibly fit. They're only $26 for a full control arm set).