Page 1 of 4
Memphis9787's 94 Eunos Presso J-Spec BPT Swap
Posted: May 14th, 2011, 5:14 am
by memphis9787
G'day everyone
Ive been meaning to start this for a while so here it is.
I bought this car in Papua New Guinea after it was imported from Japan, when I finished up there I send it back to Australia. Its stock engine wise, somewhere in the future I'll be doing a bpt or KL-ZE swap (not sure which one yet).
First thing Headlights
Chrome Ebay Lights
![Image](http://i508.photobucket.com/albums/s326/memphis9787/P1010340.jpg)
Re: Memphis9787's 94 Eunos Presso 4cyl J-Spec
Posted: May 14th, 2011, 7:31 am
by memphis9787
Next was the Back bumper, tail lights and replacing sticker for a Eunos badge (off a eunos 500)....
.
I replaced the tail lights with a aftermarket set from ebay
Before:
After:
As you can see in those pics there is paint damage to the bumper, My mum decided to take it for a drive and reversed into a pole, no supprise there as she's a habbitual car damager lol
So I sanded back the bumper primed and re-sprayed finishing with a clear coat,
and picked up a Eunos badge to replace the crappy sticker that comes stock.
Before:
After:
I sanded back the windscreen wipers as they were rusty and the paint was coming off
and primed re-sprayed (with stock paint ) and clear coat
Here are some shots I took yesterday:
And my attempt at a fancy B&W Pic
![Image](http://i508.photobucket.com/albums/s326/memphis9787/bw.jpg)
Re: Memphis9787's 94 Eunos Presso 4cyl J-Spec
Posted: May 14th, 2011, 9:38 am
by memphis9787
So today I started sanding down the roof as the sun has started destroying the paint.
Before:
Now: Starting Sanding,
![Image](http://i508.photobucket.com/albums/s326/memphis9787/P1647_14-05-11.jpg)
Re: Memphis9787's 94 Eunos Presso 4cyl J-Spec
Posted: May 14th, 2011, 10:44 am
by DeadMaker
Nice work on the rear bumper..Did you paint all of it?
Very nice and clean car..You need only bigger rims
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Memphis9787's 94 Eunos Presso 4cyl J-Spec
Posted: May 14th, 2011, 11:00 am
by memphis9787
Thx mate,
Yeah did the whole thing, I tried just doing just the spot but it looked uneven,
Ive got 17'' rims but don't have a spare $ for tires
Here is a old shot with the 17's
![Image](http://i508.photobucket.com/albums/s326/memphis9787/Mazda%20Eunos%2030x/S6001175.jpg)
Re: Memphis9787's 94 Eunos Presso 4cyl J-Spec
Posted: May 14th, 2011, 6:36 pm
by AaronTietje
Hey, cool car. My wife lived in Papua New Guinea for 5.5 years while she was in high School. Do you speek Pidgin English?
Re: Memphis9787's 94 Eunos Presso 4cyl J-Spec
Posted: May 14th, 2011, 8:42 pm
by memphis9787
Yeah man for sure, but we just call it pidgin, adding the english to the end is a more formal way/old school name,
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Memphis9787's 94 Eunos Presso 4cyl J-Spec
Posted: May 14th, 2011, 11:02 pm
by AaronTietje
Meri bilong mi i tok: Apinun! Yu stap gut? Mi no bin tokim tok pisin long taim nau. Mi gat laik long go long PNG wantaim man bilong mi wanpela de. Lukim yu bihain!
![Smile :)](./images/smilies/icon_smile.gif)
Re: Memphis9787's 94 Eunos Presso 4cyl J-Spec
Posted: November 28th, 2011, 5:09 am
by memphis9787
Yu save tok tok gutpela
![Smile :)](./images/smilies/icon_smile.gif)
Re: Memphis9787's 94 Eunos Presso 4cyl J-Spec
Posted: November 28th, 2011, 5:53 am
by memphis9787
Picked up a new Motor, Tranny ECU and Wiring Harness at very good price.
Its out of a Familia GTX
Here starts the BPT Swap
I'll be running it relativly stock.
The Plan is:
HD clutch kit either Exedy or ACT
CP Forged Pistons & Spool H-Beam Forged Rods (Still deciding, not entirely sure its neccecary hmmm....)
Aftermarket Flywheel
Upgraded Brakes
Intercooler- Not sure what size but waiting on a call from a mate,
3" Exaust
And all the other bits and bobs along the way,
Most of this is new to me so I will be learning a lot along the way
Open her up to have a look and a decent paint job
3 Coats of Flat Black High Temp Paint
2 Coats of High Temp Clear
![Image](http://i508.photobucket.com/albums/s326/memphis9787/28112011586.jpg)
Re: Memphis9787's 94 Eunos Presso 4cyl J-Spec
Posted: November 28th, 2011, 9:45 am
by AaronTietje
Nice work.
![2 Thumbs Up :2thumbsup:](./images/smilies/2thumbsup.gif)
Re: Memphis9787's 94 Eunos Presso 4cyl J-Spec
Posted: November 28th, 2011, 1:41 pm
by Josh
Very nice! My personal favorite color on the MX
![Wink ;)](./images/smilies/icon_wink.gif)
Re: Memphis9787's 94 Eunos Presso J-Spec
Posted: December 5th, 2011, 5:25 am
by ethand
Nice work getting the BPT started, do let us know how you go getting it all up & running, hey
![Smile :)](./images/smilies/icon_smile.gif)
Also, if you do end up getting that aftermarket kit, I might be interested in the J-spec front lip
![Wink ;)](./images/smilies/icon_wink.gif)
Where in Aus are you located?
Re: Memphis9787's 94 Eunos Presso J-Spec
Posted: December 7th, 2011, 8:16 pm
by memphis9787
Hey mate,
Im in Noosa, QLD.
I prob wont be getting the body kit for a while I've gotta buy all the motor gear, and get it in and running, but I'll give you a yay when that time comes,
Hopefully picking up a rear disc brake assembly from the wreckers today to start changing the rear drums over
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Memphis9787's 94 Eunos Presso J-Spec
Posted: December 8th, 2011, 8:25 pm
by ethand
Sweet as! Noosa is real nice, hey - flew over for a family holiday once, that whole coast is beaut
![Smile :)](./images/smilies/icon_smile.gif)
Sweet as, let me know! If its like 18 months time, that still doesn't bother me!
![Wink ;)](./images/smilies/icon_wink.gif)