It's time I finally let my old girl go. Some of you may recall I was going to get rid of her a few years back but honestly I had no time to deal with selling it off... so here goes again!
The ZE seized as a result of a punctured hole in the oilpan (and running her hot and dry) (cry)
Anyways... Here's the scoop on my Raspberry SE:
ZE with polished and powdercoated IM
ECU w/Dinen chip sent to Cali by Corksport for ZE reprogramming
New Front bumper - never installed (pics to follow)
Cross Drilled rotors
Altezza Taillights (may be scratched (can't remember))
Clear corners and side markers
New Magnaflow Twin Tip Exhaust system (Cat Back - w/no resonator) with 2 or 2 1/4" piping (can't remember) Very nice looking and sounding system!
Chrome door handles (interior)
Leather interior (definitely used but not too bad)
MX6 Tranny - longer pull before shifting - waaaay better!!
17" Fittipaldi Laguna Wheels - absolutely perfect wheels for the MX-3 ($4000 new!!!), however they need to be refinished (re-chromed)
I'm sure there's more on this - I just haven't looked at it in forever.
I'd rather not start piecing all the engine parts all out so lights, front bumper, and handles can go separately, but I'd rather the car just roll out and you take what you need.
Asking $1500 for everything (except the rims). Even though they're 17" and need to be rechromed, they're still amazing rims so those I will let go for $1000
AGAIN... PICS ARE COMING
[FS] Calgary Area - '93 SE with seized KL-ZE
-
- Regular Member
- Posts: 159
- Joined: September 18th, 2001, 2:01 am
- Location: Calgary, Alberta, Canada
- Contact:
[FS] Calgary Area - '93 SE with seized KL-ZE
Last edited by blikmik on August 21st, 2010, 6:07 pm, edited 1 time in total.
-
- Regular Member
- Posts: 159
- Joined: September 18th, 2001, 2:01 am
- Location: Calgary, Alberta, Canada
- Contact:
Re: Calgary Area - '93 SE with seized KL-ZE
Bumper:
http://i147.photobucket.com/albums/r318 ... IKMIK3.jpg
http://i147.photobucket.com/albums/r318 ... 4_full.jpg
Rims:
http://i147.photobucket.com/albums/r318 ... IKMIK4.jpg
http://i147.photobucket.com/albums/r318 ... k/Side.jpg
Engine:
http://i147.photobucket.com/albums/r318 ... IKMIK6.jpg
http://i147.photobucket.com/albums/r318 ... IKMIK5.jpg
http://i147.photobucket.com/albums/r318 ... IKMIK3.jpg
http://i147.photobucket.com/albums/r318 ... 4_full.jpg
Rims:
http://i147.photobucket.com/albums/r318 ... IKMIK4.jpg
http://i147.photobucket.com/albums/r318 ... k/Side.jpg
Engine:
http://i147.photobucket.com/albums/r318 ... IKMIK6.jpg
http://i147.photobucket.com/albums/r318 ... IKMIK5.jpg
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [FS] Calgary Area - '93 SE with seized KL-ZE
If I had the means to bring her to Oregon, I'd be all over this. :/
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
Re: [FS] Calgary Area - '93 SE with seized KL-ZE
hey Mike,
I would be interested in taking a look at the purple beast.
let me know whats up.
Jesse
I would be interested in taking a look at the purple beast.
let me know whats up.
Jesse
Jesse<BR>red 92 gs
-
- Regular Member
- Posts: 1749
- Joined: April 17th, 2002, 2:01 am
- Location: Okotoks, Alberta Canada
- Contact:
Re: [FS] Calgary Area - '93 SE with seized KL-ZE
very interested and very serious. sent you a pm.
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: [FS] Calgary Area - '93 SE with seized KL-ZE
I thought you were going to get Dave's car? You got a purple car obsession? lolcurtklze wrote:very interested and very serious. sent you a pm.
-
- Regular Member
- Posts: 159
- Joined: September 18th, 2001, 2:01 am
- Location: Calgary, Alberta, Canada
- Contact:
Re: [FS] Calgary Area - '93 SE with seized KL-ZE
OK... after the many PM's and initial interest, I should clarify a few things here.
The car has sat for a few years now. The motor isn't shiny and new. The body has dings and is definately NOT perfect. There's no OEM front bumper. If it was as simple as just fixing the old motor... I would have done that.
IMO, this is a great parts car - KLZE parts, Glass (all around), Doors, Interior (not perfect), Exhaust, ECU, Sunroof, Tranny (MX-6), Body Kit, etc...
I really don't want to chop it up and sell piece by piece for the next three years. If that's your thing and you think you can use some parts and sell the rest... then this is your car. I'll try to get a pic up of the car this weekend... but it's definately NOT LIKE THE PREVIOUS PHOTOS ANYMORE.
Happy Hunting kids!
The car has sat for a few years now. The motor isn't shiny and new. The body has dings and is definately NOT perfect. There's no OEM front bumper. If it was as simple as just fixing the old motor... I would have done that.
IMO, this is a great parts car - KLZE parts, Glass (all around), Doors, Interior (not perfect), Exhaust, ECU, Sunroof, Tranny (MX-6), Body Kit, etc...
I really don't want to chop it up and sell piece by piece for the next three years. If that's your thing and you think you can use some parts and sell the rest... then this is your car. I'll try to get a pic up of the car this weekend... but it's definately NOT LIKE THE PREVIOUS PHOTOS ANYMORE.
Happy Hunting kids!