Page 1 of 1
disassembling the transmission
Posted: October 9th, 2009, 4:55 pm
by mazdapr
i will be installing a phantom grip on a 93 mx3 gs transmission but i cant find the procedure how to take the trans apart. if anybodu has it let me know.
Re: disassembling the transmission
Posted: October 9th, 2009, 6:44 pm
by umcamara
Here's a complete tear-down and rebuild, but you'll need to register (free).
Click Here
Re: disassembling the transmission
Posted: October 9th, 2009, 6:45 pm
by Mooneggs
I really really really would not recommend installing that...
you're going to end up spending more money in the long run you might as well get the LSD from MFactory and do it right the first time...
The link I was going to give is the same as umcamara - also check the shop manual...
Re: disassembling the transmission
Posted: October 9th, 2009, 10:17 pm
by mazdapr
Mooneggs wrote:I really really really would not recommend installing that...
you're going to end up spending more money in the long run you might as well get the LSD from MFactory and do it right the first time...
The link I was going to give is the same as umcamara - also check the shop manual...
why?? i keep reading good stuff and bad stuff about this product but when i see a negative feedback about it i dont see no explanation no reasons. just its bad stuff dont used it.