Page 1 of 1
Jap spec and aus spec
Posted: June 5th, 2009, 5:58 am
by LayZieBoNeLBurNa
how would you know if your car is a jap spec
i have a mazda eunos 30x 1.8L v6 i want to know if it is a jap spec
Re: Jap spec and aus spec
Posted: June 5th, 2009, 6:16 am
by muttpower
Is speedo in mph or kph??? If it's KPH, then it rules out UK spec...so far as I know though, the mx3 was sold as the Autozam AZ3 in Japan, and as the Eunos 30X in Australia...could be wrong though, so I'll double check on it.
Re: Jap spec and aus spec
Posted: June 5th, 2009, 9:39 am
by projectzemx3
i thought eunos was JDM.
Re: Jap spec and aus spec
Posted: June 5th, 2009, 11:44 am
by Mooneggs
I'm about to get a bunch of brochures, hopefully that will clear it up but from my research so far...
In Japan:
Autozam AZ-3
Eunos Presso
Australia:
Eunos 30x
UK got a mix of everything:
Eunos Presso
Eunos 30x
Autozam AZ-3
MX-3
North America:
Mazda MX-3
and this might help
http://www.mx-3.com/history/" onclick="window.open(this.href);return false;
Re: Jap spec and aus spec
Posted: June 5th, 2009, 4:12 pm
by Whisper
Which side is the steering wheel on?
Re: Jap spec and aus spec
Posted: June 5th, 2009, 4:26 pm
by Evo_Spec
Whisper wrote:Which side is the steering wheel on?
lol, both australia and japan would be on the right side =P
Re: Jap spec and aus spec
Posted: June 5th, 2009, 4:35 pm
by Whisper
Oh, well, that doesn't help then.
Re: Jap spec and aus spec
Posted: June 6th, 2009, 4:40 am
by kiwimx3
Mooneggs wrote:I'm about to get a bunch of brochures, hopefully that will clear it up but from my research so far...
In Japan:
Autozam AZ-3
Eunos Presso
Australia:
Eunos 30x
UK got a mix of everything:
Eunos Presso
Eunos 30x
Autozam AZ-3
MX-3
North America:
Mazda MX-3
and this might help
http://www.mx-3.com/history/" onclick="window.open(this.href);return false;
In NZ
Autozam AZ-3
Eunos Presso
Eunos 30x
Due to us being the land of japanese imports.
Basicly the only difference I can honestly say is trim levels, mechaincally they are the same.
Re: Jap spec and aus spec
Posted: June 8th, 2009, 8:42 am
by RX8SE3P
The speedo will only go up to 180Kmph. The Australian Eunos 30x speedo goes to 240kmph.
Also, you most likely won't have an EGR valve on the engine.
Then it would be a Jap import car. The difference is not much either. I think the K8-ZE makes a few more KW of power over the K8-DE. 100KW VS 104-108KW? Hardly anything. Probably 100% due to being run off high octane and not having EGR.