[FS] My '92 GS - The Great Part Out

[Nd4SpdSe]

Well my time with the Mx-3 is done. I think it's time to part with my very first car, pride-and-joy of 7 years. She's been off the road for over a year and a half now, but after spending probably close to C$30'000 on her in her life, and it seems anothe $10K to go to get what I want to get done, on a car I paid $4200 for back in '02, that it's time to move on to bigger and better things. She will be greatly missed, but honestly I'm quite excited to what could be in store....but more likely not until spring 2010.

I'm not here to screw anyone over, but it won't be an auction. Dibs only will work for a short time; week or two tops, I've been screwed over many times hold stuff for people that don't come through. Depends on the offer, but if you offer my asking price, it's "yours" even if someone offers me more money that what I'm asking, however if you ask me to bring down the price and someone offers me what I'm asking, than it's theirs, plain and simple. I'm not happy with what I'm doing, but it's for the best, and if I'm going to do this, I'm going to make it worth it.

I can send/post pics on request. However, EVERYTHING on my Mx-3 is up for grabs, so if you know of anything I didn't list, or parts off the car, let me know.

All prices are listed in CANADIAN funds and do NOT including shipping, but I'll ship anywhere in the world. For those wanting to know roughly how much it would cost in their local currency, check out http://www.Xe.com" onclick="window.open(this.href);return false; for their easy-to-use currency converter.

- Just a note, it seems that the shipping cost to send anything to the US is at least $20, no matter how small or light it is.
- Insurance shipped within Canada - Add $1.00
- Insurance shipped to the United States - Add $3.50

List Updated: April 4, 2012

Audio
Clarion 5.25" Speakers in factory front speaker mounts - $40

Exterior
94-96 GS Canadian wrap-around spoiler, Green, 1 cap - $100

Engine
KLZE Curved-Neck IM - $100
Powdercoated "24-Valve" Valve Covers - $100

Drivetrain
(Sold) Adjustable Cam Gears Blue - $300
(Sold) Escort ZX2 4.11:1 Gearset (30K Miles), MSP LSD (new) v2 Welded & Balanced, full trans bushings/switches kit w/free trans with broken 4th syncro - $900
(Sold) Ferrea Springs, Retainers, Seats & Locks - $800
(Sold) Clutchmaster Stage 3 + Fidenza - $600
(Sold) K8 Disty w/PRD Disty Cap, Blaster SS & GM HEI - $100
(Sold) Colt N/A 210 Cams - $300
(Sold) MazdaSpeed 80A Filled Mounts - $200
(Sold) K8 w/ Prodinator - $80
(Sold) Polished KLZE Curved-Neck - $150
(Sold) Millenia 110A Alternator w/Wiring - $100
(Sold) SRD Member Mount Bushings - $50
(Sold) KL36 ECU w/No Speed Limiter - $200
(Sold) 67mm Throttle Body $80
(Sold) Unorthodox UDP - $60 (used)
(Sold) Outlaw IM & TB Spacers, No Gaskets - $80
(Sold) B&M Short Shifter - $100 (new)
(Sold) Dual-Feed Aeromotive FPR & Liquid-Fulled Gauge - $100 (new)
(Sold) 1x Optima Red Top. Brand new - $100
(Sold) Millenia S Rods, Like New - $150
(Sold) Full V6 Bolt-In Exhaust - OBX Headers, Magnaflow Cat & Muffler, 2.5" Piping, - $400
(Sold) Used Bully Stage 2 Clutch - $Free
(Sold) KLZE Heads Shaved - $150
(Sold) KLZE Heads - Blown Motor - $100
(Sold) Megasquirt - V3 w/Coil Pack Support - $500 (new)
(Sold) Millenia S Injectors w/rails- $150
(Sold) Both Axles
(Sold) KLZE Crank
(Sold) Power Steering Pump
(Sold) Both O2 Sensors
(Sold) Walbro LP 255LPH Fuel Pump - $80 (used)
(Sold) Fuel Sending Unit, Mazda OEM Used Few Months - $80
(Sold) MazdaSpeed Motor Mounts - $80 (used)
(Sold) KL Clevite Main & Rod Bearings - $200 (new)
(Sold) K8 Flywheel - $40

Interior
(Sold) Mx-3 Aluminum Pedals - $60
(Sold) OEM Stainless Door Sills - $150
(Sold) OEM Floor Mats *mint* - $100
(Sold) Power Mirror Switch w/Folding Mirror Switch - $20
(Sold) Gauge Cluster w/Speedhut Gauges - $30
(Sold) Full OEM Leather Front & Rear Seats - $600 (new)
(Sold) JDM "Drivers Side" Door Panel w/modified window control box (PnP) - $160
(Sold) OEM Floor Mats *very good* - $40
(Sold) SE Heated Seat Switches, Pair. Modified w/Blue LED - $40
(Sold) Blue Racing Wheel w/Horn & Momo hub. Comes with relocated cruise controls - $100
(Sold) Custom Hatch Cover (CarPC)
(Sold) MazdaSpeed Seat Belt Pads x4 Blue - $20
(Sold) 3-Gauge A-Pillar Pod - $60 (new)
(Sold) Double-Stack Center Console - $20
(Sold) Speedhut HVAC Panel - $40

Exterior
(Sold) Eurolite Blue 9000v Underbody Neons - $100
(Sold) MazdaSpeed Bumper - $200
(Sold) OEM JDM Fog Lights - $100
(Sold) Carbon Fiber Inverted Hood - $400
(Sold) Carbon Fiber Rad Support - $50
(Sold) Carbon Fiber Hatch - $500 (New)
(Sold) JDM OEM Full-Length Side Skirts - $400
(Sold) Stock hood, repainted and used only for a few weeks. MINT - $100
(Sold) Passenger door, great shape, power windows - $60
(Sold) Drivers door, power lock actuator added, power windows - $60
(Sold) Stock hatch. Great shape. - $150
(Sold) Driver and passenger side fenders - $100
(Sold) OEM Rear Bumper w/Miata Mud Guards - $60
(Sold) 5x Honig Helium Rims on Kumho Mx Front & Escta 712 Rear - $300
(Sold) Supra-Style Wing w/Matching Hatch Garnish - $200
(Sold) Hybrid Stock Taillight with Altezza housings - $60

Suspension
(Sold) Corksport Front & Rear Strut Bars - $100
(Sold) Stainless Brake Lines Black - $100 (new)
(Sold) Brembo Slotted & Drilled Rotors + PBR ULX Ceramic Pads (less than 10K kms) - $100
(Sold) Whiteline Rear Sway Bar - $200 (new)
(Sold) Wytbishop Solid End Links - $100 (new)
(Sold) SRD Crossmember & Rear Tie Bar - $160
(Sold) H&R Springs - $100
(Sold) Stock Rear Sway Bar
(Sold) Ball Joints
(Sold) V6 Traction Bars - $300 (new)
(Sold) Koni Red Adjustable Struts Inserts (cost C$800+ new) - $200
(Sold) Rear Trailing Arms (used 2 years) - $60

Audio
(Sold) Pioneer 7800 Head Unit. CD/MP3/WMA & Cell Phone Bluetooth - $200
(Sold) Pioneer 2-Ch 760w Amp + Pioneer 12" Sub In Box + 4 Gauge Raptor Wiring Kit - $180
(Sold) Factory Tape Player - $Free
[/color]

Misc
(Sold) Mx-3 Parking Only" Sign - $40
(Sold) Mazda Manuals - $40 For All
(Sold) Engine Hoist
(Sold) Engine Stand

Scrap
V6 MTX Radiator - $60
V6 K8 Trans, Shifts Smooth - $100
Mx3 Stock 90amp Alt - $40
KLZE Injectors w/Rail - $50
2 Sets of Stock Tail Lights - $20/pair

[onlytrueromeo]

Are you free this weekend? I'd really like to come up and take a look at alot of stuff, and pick up the msp front bumper, prd cap + stuff and other things. It'd be a 5-6 hr drive for me, so I would need you to hold at least the bumper til I got there, if that's OK.

Msp front bumper
SS Door sills
PRD cap + blaster etc
SS Brake lines
Fog lights + switch (how bright are the fog lights?)
Strut bars (if I can fit the one over my ZE w/ outlaw spacers)

Can I get pictures of where the bumper is cracked? THanks

[kast2L]

omg I want everything uhh if true romeo doesn't buy them, i want the strut bars, UDP, fidanza fly wheel, H & R springs, outlaw IM & TB, ECU chipped need all shipped to 11701, retainers and springs, 67 mm throttle body too. do i get a slight discount for buyin so much? : )

EDIT: how much for just obx headers?

[Nd4SpdSe]

I could make some time, I've got a stag Sat night and a Christening Sunday morning, so I could arrange something around that if it's good for you.

Bumper's got a crack, but it's an easy fix
Fog lights are awesome, better than the actual headlights, used to drive with them all the time.
Strut bar has been modified and it does fit over a ZE w/Outlaw spacers, cause that's what I was running, but it'll take you some shaving on the one VRIS cover, those stupid things sticking out from the top, you can grind them right off, I could show you, but apparently my motor sits higher than everyone elses's (since I had to mod my CF hood to fit), so if I can fit it, anyone else can. I'll take a pic of the bumper tonight.

[Nd4SpdSe]

omg I want everything uhh if true romeo doesn't buy them, i want the strut bars, UDP, fidanza fly wheel, H & R springs, outlaw IM & TB, need all shipped to 11701, retainers and springs, 67 mm throttle body too. do i get a slight discount for buyin so much? : )

EDIT: how much for just obx headers?

Depends...the only thing with the outlaw TB spacer and TB is that I lent them to Kp2t 2 weeks ago, so I'll need to get it back from him.

The exhaust is literally full Mx-3 bolt-in at this time with the header since the header were modified to fit, so I'm not willing to part them from the rest at this time. Not sure if I want to part the flywheel from the clutch, unless I have a buyer for the clutch alone.

[kast2L]

omg I want everything uhh if true romeo doesn't buy them, i want the strut bars, UDP, fidanza fly wheel, H & R springs, outlaw IM & TB, need all shipped to 11701, retainers and springs, 67 mm throttle body too. do i get a slight discount for buyin so much? : )

EDIT: how much for just obx headers?

Depends...the only thing with the outlaw TB spacer and TB is that I lent them to Kp2t 2 weeks ago, so I'll need to get it back from him.

The exhaust is literally full Mx-3 bolt-in at this time with the header since the header were modified to fit, so I'm not willing to part them from the rest at this time. Not sure if I want to part the flywheel from the clutch, unless I have a buyer for the clutch alone.

Makes sense, I asked about the headers because I have exhaust on the car already and the TB spacer is not a huge concern i rather have the IM one.

[onlytrueromeo]

I could leave first thing tomorrow morning and hopefully be there ~noon-1pm. Is this too late/early? I'd hafta cross the border, so I don't know how long that would take - they see someone in their early - mid twenties when i try to cross the border by me and they question me for 30 mins.

[kast2L]

I could leave first thing tomorrow morning and hopefully be there ~noon-1pm. Is this too late/early? I'd hafta cross the border, so I don't know how long that would take - they see someone in their early - mid twenties when i try to cross the border by me and they question me for 30 mins.

bring me back some parts romeo!

[onlytrueromeo]

I'd pick up parts for other NY'ers if they paid me for them, I don't want to front money and be stuck with the parts! I wouldn't be able to deliver them to you though, you're too far away I'd say you could pick them up from me to save shipping, but It's a HAUL from lower NY (Never driven up from LI in 1 straight trip, but from Westchester its about 6-6.5 hours) Thruway for 4 hours, then mountain roads the rest!

[kast2L]

I'd pick up parts for other NY'ers if they paid me for them, I don't want to front money and be stuck with the parts! I wouldn't be able to deliver them to you though, you're too far away I'd say you could pick them up from me to save shipping, but It's a HAUL from lower NY (Never driven up from LI in 1 straight trip, but from Westchester its about 6-6.5 hours) Thruway for 4 hours, then mountain roads the rest!

yea I feel you its just that if he was to ship them to me also I would be paying almost as much for shipping as im paying for the parts themselves because of customs and you wouldn't have to front him the money, I could paypal that to him and I could pay you for the shipping if you wouldn't mind or make a DEEP trip to albany, lol

[onlytrueromeo]

I won't be goin to albany til June 20th, but if you could wait until then that would work!

Also, I'd be driving my mx3 to his place, so I wouldn't be able to take exhaust, etc. I'll have room for smaller stuff for sure but not huge things!

[kast2L]

I won't be goin to albany til June 20th, but if you could wait until then that would work!

Also, I'd be driving my mx3 to his place, so I wouldn't be able to take exhaust, etc. I'll have room for smaller stuff for sure but not huge things!

sounds good because its like 3-4 hours straight to albany from here and I dont work weekends!

[hppwdn]

Well,
Put me in line for the following and if my turn pops up PM me and I'll paypal right away.
OEM Stainless Door Sills - $150
Fidanza (if you decide to sell it by itself)

Interested in pics of the floormats too, I'm assuming they're black.

[Mooneggs]

I'm interested in the 2 sets of the floormats... whichever ones hppwdn doesn't want as long as they are the first gen OEM mats with the stitching and not the sticker type...

EDIT: taking my dibs off the JDM full length sides... and adding dibs to the CF rad support
EDIT2: taking my dibs off the floormats... and adding dibs to the mx-3 parking only sign

[ElectronBlue]

hey im intersted in the mazda speed motor mounts im living in hamilton during the week so just let me know when u are free... you can also reach me at k_north_34@hotmail.com" onclick="window.open(this.href);return false;

sincerely Kris