1.6 Mx-3 Intakes

CorkSport · Post by **CorkSport** » May 19th, 2009, 4:24 pm

How many people would be interested in a cold air intake for the 4 cylinder Mx3s? The retail price would be around $179-199 and would include an AEM dryflow air filter.

Derrick

CorkSport · Post by **CorkSport** » May 26th, 2009, 6:55 pm

Here is a picture of a test part were have built.

vancouverwa · Post by **vancouverwa** » May 26th, 2009, 7:18 pm

have you guys fabed some sort of adapter plate for the vaf on the single cam?

Thassodar · Post by **Thassodar** » May 26th, 2009, 7:35 pm

My main issue is the VAF seen in this post: http://www.mx-3.com/phpBB3/viewtopic.php?f=3&t=67461" onclick="window.open(this.href);return false;

I had to rig mine up with a part that mostly fit, converting the rectangle connector from the VAF into a circle so I could put a cone filter on. Other than removing the old air box and putting the cone filter on, I haven't gotten the metal pipes for it to be an official "CAI" or whatever.

If you guys have come up with some adapter plate or something to get around the huge VAF that is on the 92 - 94 (I think) SOHC MX-3, consider me interested. Otherwise I'll pass.

vancouverwa · Post by **vancouverwa** » May 26th, 2009, 8:01 pm

you guys can borrow my car but if your looking for a bone stock single cam my girlfriend just picked one up you can use but its auto... mines got intake and catback if thats going to make a difference? im just off 164th and 4th plain

Dark_Rider2k3 · Post by **Dark_Rider2k3** » May 29th, 2009, 9:32 am

yeah i'm in the same boat. I'll pass unless you have a good mounting kit, as mine just kinda hangs there haha.

And the VAF is huge too.. a work around for that might get better sales..

CorkSport · Post by **CorkSport** » May 29th, 2009, 4:26 pm

We have a VAF adapter which can be used. We will also have a support bracket on this. We tried out the fitment on a board members SOHC and we need to tweak a few things.

Derrick

smoke187 · Post by **smoke187** » July 30th, 2009, 2:09 pm

that almost looks like it would fit a bp swapped mx3

mars · Post by **mars** » July 31st, 2009, 3:12 am

has this part been totally developped ? is it shippable to Europe ?

CorkSport · Post by **CorkSport** » June 3rd, 2010, 4:19 pm

We are going to get this project going again. I am looking for a 1.6 SOHC and a 1.6 DOHC Mx3 in the Portland Or/Vancouver WA area to do some test fitting. Please shoot me a PM or give us a call at 360 260 2675.

-Derrick

CorkSport · Post by **CorkSport** » June 17th, 2010, 1:41 pm

No interest in this from anyone? We will be looking at the V6 models as well.

-Derrick

mars · Post by **mars** » July 29th, 2010, 5:06 am

I could be interested ... as well as many frenchs ... but you know where I am .. i can't bring parts to you ...

MX-3.com

1.6 Mx-3 Intakes

1.6 Mx-3 Intakes

Re: 1.6 Mx-3 Intakes

Re: 1.6 Mx-3 Intakes

Re: 1.6 Mx-3 Intakes

Re: 1.6 Mx-3 Intakes

Re: 1.6 Mx-3 Intakes

Re: 1.6 Mx-3 Intakes

Re: 1.6 Mx-3 Intakes

Re: 1.6 Mx-3 Intakes

Re: 1.6 Mx-3 Intakes

Re: 1.6 Mx-3 Intakes

Re: 1.6 Mx-3 Intakes