MX-3.com

Now I forgot the site that was selling them and they were kinda expensive, could do up to 300 hp so I didn't want old stock axles with a built klze destroyin them lol

drivehsaftshop makes some and you can purchase them directly or you can get them at horsepowerfreaks.com


How mcuh power is your "Built klze" making to break axles?

Funny.. I need new axles too now. I bought Napa's crappy house brand axles when I did my ZE swap last year, and the CV joints are all going. There's about 2-3 degrees of play and they clunk and clatter. The boots are fine.. everything still sealed. The play is mostly on the inner joints.

Let me know what you end up going with. I was told good things about Raxles a while back.

nightfire wrote:Funny.. I need new axles too now. I bought Napa's crappy house brand axles when I did my ZE swap last year, and the CV joints are all going. There's about 2-3 degrees of play and they clunk and clatter. The boots are fine.. everything still sealed. The play is mostly on the inner joints.

Let me know what you end up going with. I was told good things about Raxles a while back.

napa has lifetime warranty

mitmaks wrote:

nightfire wrote:Funny.. I need new axles too now. I bought Napa's crappy house brand axles when I did my ZE swap last year, and the CV joints are all going. There's about 2-3 degrees of play and they clunk and clatter. The boots are fine.. everything still sealed. The play is mostly on the inner joints.

Let me know what you end up going with. I was told good things about Raxles a while back.

napa has lifetime warranty

Hmm... what if I don't have the bill? I might, but I highly doubt it. I'm terrible with these things.

learn to preload, and you shouldnt have to worry about snapping axels.

mx3autozam wrote:drivehsaftshop makes some and you can purchase them directly or you can get them at horsepowerfreaks.com


How mcuh power is your "Built klze" making to break axles?

well it will be making well over 250hp im sure when its done and stock axles on the mx3 weren't made for such power.

kast2L wrote:

mx3autozam wrote:drivehsaftshop makes some and you can purchase them directly or you can get them at horsepowerfreaks.com


How mcuh power is your "Built klze" making to break axles?

well it will be making well over 250hp im sure when its done and stock axles on the mx3 weren't made for such power.

neither was the stock transmission..... as you will soon find out

nos92mx3 wrote:learn to preload, and you shouldnt have to worry about snapping axels.

That is not true, I had never hurt any of my many axles that i snapped on the launch. I always broke them hitting 2nd gear. And after several axles, you'll get tired of breaking them and going through the whole swapping process.





If your snapping them like this every time, then you'll need stronger axles. I ended up buying some from CVTECH, I don't have a phone number but they are in Canada.

even with 300whp/trq you wont need aftermarket axels. The stock ones are more than most will ever need and plus you will crack you tranny case/ blow out gears before you snap axels. Buy a LSD instead

mazdamx3freak wrote:even with 300whp/trq you wont need aftermarket axels. The stock ones are more than most will ever need and plus you will crack you tranny case/ blow out gears before you snap axels. Buy a LSD instead

getting an LSD from a group buy.

what lsd..mfactory????

mx3autozam wrote:what lsd..mfactory????

yea thats who im getting it from why, they aren't good?

Honda boys love them, can't be that bad...! I have good faith in them.

very well known for Honda's the one for the kl I think has some issues. Dansac aka Frakenprobe was doing testing with them and they have some play in the axles. You can grab the axle and pull it out about an inch on each side. They are workin with him on correcting the problem before they start production. But they should be a good unit and fairly well priced.