(FS)Parting out 93 SE ZE
- ProspectMx3
- Regular Member
- Posts: 126
- Joined: October 26th, 2005, 8:08 pm
- Location: Markham, Ontario
- Contact:
(FS)Parting out 93 SE ZE
I spent alot of money and time putting this car together but unforcantly it was hit head on at 80Km/h and destroyed.
What is left I am parting out. All parts are located in Oshawa, Ontario. I am willing to ship. Just ask me for pictures and I will post them. Car was 99% rust free so has good panels left
Se Leather Interior (drivers seat has a few tears on the shoulder)
Front seats/Wiring harness/switchs/Rear seats/door skins/1/4 skins $230
B&G lowering springs Sold
GTO Deep Window Visors $25
Custom Made Side Skirts $40 (one needs some touch up)
Dry Nitrous (NOS) kit (Complete minus JET) Sold
Custom complete stainless Magnoflow Exhaust 2.5"$80
Ash Tray $15
Steering Column, slighty bent. Good switchs/key cylinder $35
Center Vent/Dash Vents $30
Rear Bumper complete $50
Tail Lights $40/set
All seat belts $15
Power mirror/dimmer switch B/O
Door sills $10
Kick Panels $10
Head Liner/Visors sold
Drivers Lower Dash pan $15
Rear speakers covers sold
Rear subframe Sold
Quarter Panels sold
Rockers sold
Doors-Sold
Hatch-Shaved Sold
Lightened Flywheel sold
Front Brakes/spindals sold
17" Montegi rims/tires black. 6 months old. I barely drove on the tires. Maybe 6000km $650
KL36 ECU sold
323 GTX ECU/wiring harness $100
Kenwood 600W 2channel $130
Older Alpine Flip out 7" screen. Works good sold
Mega squirt Fuel Conrtol. Complete minus ecu cable($30at future shop)$160
Added
Kl06 Cams $50
What is left I am parting out. All parts are located in Oshawa, Ontario. I am willing to ship. Just ask me for pictures and I will post them. Car was 99% rust free so has good panels left
Se Leather Interior (drivers seat has a few tears on the shoulder)
Front seats/Wiring harness/switchs/Rear seats/door skins/1/4 skins $230
B&G lowering springs Sold
GTO Deep Window Visors $25
Custom Made Side Skirts $40 (one needs some touch up)
Dry Nitrous (NOS) kit (Complete minus JET) Sold
Custom complete stainless Magnoflow Exhaust 2.5"$80
Ash Tray $15
Steering Column, slighty bent. Good switchs/key cylinder $35
Center Vent/Dash Vents $30
Rear Bumper complete $50
Tail Lights $40/set
All seat belts $15
Power mirror/dimmer switch B/O
Door sills $10
Kick Panels $10
Head Liner/Visors sold
Drivers Lower Dash pan $15
Rear speakers covers sold
Rear subframe Sold
Quarter Panels sold
Rockers sold
Doors-Sold
Hatch-Shaved Sold
Lightened Flywheel sold
Front Brakes/spindals sold
17" Montegi rims/tires black. 6 months old. I barely drove on the tires. Maybe 6000km $650
KL36 ECU sold
323 GTX ECU/wiring harness $100
Kenwood 600W 2channel $130
Older Alpine Flip out 7" screen. Works good sold
Mega squirt Fuel Conrtol. Complete minus ecu cable($30at future shop)$160
Added
Kl06 Cams $50
Last edited by ProspectMx3 on March 25th, 2009, 7:57 pm, edited 3 times in total.
Stock Sucks
Race Cars!!!
Race Cars!!!
- rekognize
- Regular Member
- Posts: 809
- Joined: September 2nd, 2006, 10:58 am
- Location: Toronto, ON
- Contact:
Re: (FS)Parting out 93 SE ZE
dibs on the seats, doors, hatch, and rear subframe
Last edited by rekognize on February 6th, 2009, 6:19 am, edited 1 time in total.
- Jovian2k
- Supporting Member
- Posts: 851
- Joined: June 3rd, 2004, 2:01 am
- Location: La Prairie, QC + Stratford, CT
Re: (FS)Parting out 93 SE ZE
PM'd about side skirts
- 2fazed
- Supporting Member
- Posts: 1885
- Joined: May 21st, 2002, 2:01 am
- Location: La Selva Beach, California
- Contact:
Re: (FS)Parting out 93 SE ZE
Pm'd about the flywheel and cams.
16 Hyundai Elantra Value Edition
06 Mazdaspeed6 2.3T
93 626 ES 2.5
92 Mx-3 RS 1.6
93 Mx-3 GS 2.5
93 Mx-3 RS 1.6
06 Mazdaspeed6 2.3T
93 626 ES 2.5
92 Mx-3 RS 1.6
93 Mx-3 GS 2.5
93 Mx-3 RS 1.6
- 10secSim
- Regular Member
- Posts: 145
- Joined: May 30th, 2006, 6:42 pm
- Location: Cornwall, Ontario, Canada
Re: (FS)Parting out 93 SE ZE
dibs on rear driver side caliper pm me for a price plz
B6 1.6L DOHC, CAI, custom intake mani. with internal velocity stacks, 65mm thottle body, probe 4-2-1 header, custom 2.5" high flow exhaust, Centerforce dual friction, MS2, MSD 6A, Tokico struts, EIBACH springs.
http://www.cardomain.com/ride/2443642" onclick="window.open(this.href);return false;
http://www.cardomain.com/ride/2443642" onclick="window.open(this.href);return false;
- tehbrookzorz
- Regular Member
- Posts: 1561
- Joined: April 29th, 2006, 6:59 pm
- Location: Calgary, Alberta
Re: (FS)Parting out 93 SE ZE
You have aftermarket tail lights ?
- ProspectMx3
- Regular Member
- Posts: 126
- Joined: October 26th, 2005, 8:08 pm
- Location: Markham, Ontario
- Contact:
Re: (FS)Parting out 93 SE ZE
Pm'd
The parts room
Rear calipers *Sold
Visors*Lost picture will post tommorow
Tail lights are stocklightly tinted
Exhaust all stainless. No cat, straight pipe**Have spare gaskets
Skirts are custom made, very flexable. Been sand blased over time and ends need tlc
Anything else youwant pics of just let me know
Also have KL36 ECU
323 GTX ECU
The parts room
Rear calipers *Sold
Visors*Lost picture will post tommorow
Tail lights are stocklightly tinted
Exhaust all stainless. No cat, straight pipe**Have spare gaskets
Skirts are custom made, very flexable. Been sand blased over time and ends need tlc
Anything else youwant pics of just let me know
Also have KL36 ECU
323 GTX ECU
Stock Sucks
Race Cars!!!
Race Cars!!!
- se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
Re: (FS)Parting out 93 SE ZE
um, what is the condition of the intake and heads on that ZE?
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
Re: (FS)Parting out 93 SE ZE
Do you have logic-type HVAC in this MX-3?
MX-3 V6 1993 | Black | EU-spec | K819
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: (FS)Parting out 93 SE ZE
I don't need anything, but just wanted to say sorry to see it go, and I hope there aren't any lasting injuries.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: (FS)Parting out 93 SE ZE
Yeah, sorry about your ride. Did the '93s have airbags? Your neck must have been sore for weeks..
Good luck in your next project.
I am interested in the rocker panels I think... do they bolt on, or would I need to weld them? I just noticed I have a huge 6" hole behind the wheel well in mine.
Good luck in your next project.
I am interested in the rocker panels I think... do they bolt on, or would I need to weld them? I just noticed I have a huge 6" hole behind the wheel well in mine.
- Gord
1996 MX-3 GS-ZE 2.5L 5spd
KLZE+LSD / Headers / KL02 VAF / Clutchmasters stage-I / Fidanza 9lb flywheel / Eibach Pro Kit / Tokico HPs / Urethane bushings & mounts / SSR Comp-C 16x7 / General Exclaim UHP 205/45R16 / Wilwood 13" brakes / Whiteline rear swaybar / Carputer / Software Crossover / Infinity components+subs / 41hz Tripath Amp9 / Trunk SLA batt / Keyless entry
1996 MX-3 GS-ZE 2.5L 5spd
KLZE+LSD / Headers / KL02 VAF / Clutchmasters stage-I / Fidanza 9lb flywheel / Eibach Pro Kit / Tokico HPs / Urethane bushings & mounts / SSR Comp-C 16x7 / General Exclaim UHP 205/45R16 / Wilwood 13" brakes / Whiteline rear swaybar / Carputer / Software Crossover / Infinity components+subs / 41hz Tripath Amp9 / Trunk SLA batt / Keyless entry
Re: (FS)Parting out 93 SE ZE
dibs on nitrous
- ProspectMx3
- Regular Member
- Posts: 126
- Joined: October 26th, 2005, 8:08 pm
- Location: Markham, Ontario
- Contact:
Re: (FS)Parting out 93 SE ZE
Update
93 did not have air bags. I wasen't driving when it happened. The driver tried to pull around a truck an met another 3/4ton dodge at 70-80km head on, plus the speed of the dodge. After impact it bounced back 40ft. Blew the windshield clean out. He managed to live with only minor injuries.
MY new project is 2 years in the making
1990 350Rwhp all motor MR2 Turbo
Doors, Hatch, Rear subframe and brake's gone.
Also added/left
17" Montegi rims/tires black. 6 months old. I barely drove on the tires. Maybe 6000km $650
KL36 ECU $120
323 GTX ECU/wiring harness $100
Kenwood 600W 2channel $
Older Alpine Flip out 7" screen. Works good $125
93 did not have air bags. I wasen't driving when it happened. The driver tried to pull around a truck an met another 3/4ton dodge at 70-80km head on, plus the speed of the dodge. After impact it bounced back 40ft. Blew the windshield clean out. He managed to live with only minor injuries.
MY new project is 2 years in the making
1990 350Rwhp all motor MR2 Turbo
Doors, Hatch, Rear subframe and brake's gone.
Also added/left
17" Montegi rims/tires black. 6 months old. I barely drove on the tires. Maybe 6000km $650
KL36 ECU $120
323 GTX ECU/wiring harness $100
Kenwood 600W 2channel $
Older Alpine Flip out 7" screen. Works good $125
Stock Sucks
Race Cars!!!
Race Cars!!!
Re: (FS)Parting out 93 SE ZE
Do you have the rear side panels (armrests)? If you do, what colour are they and how much do you want for them?
KLZE-ed '94 RS/'92 GS hybrid -- It's complicated -- Now somebody's winter beater
1999 Audi A4 2.8Q -- New ride
1999 Audi A4 2.8Q -- New ride