MX-3.com

the engine is 1.6 Dohc.i have swaped engines,and now i get no spark,the engine before the swap worked fine,becouse i tested it.but when i swaped the engines,i get no spark
when i turn the ignition key,there is spark,but when the engine turn,the distributor gives no spark ? does somebody know's what's the problem?

i just had a similar issue. check your voltages on your distributor clips, if your getting the proper volts then its your distributor. with mine i thought it was the distributor but when i checked the voltages on the 3 pin disty clip neither ground was grounding but i was getting power where i should. changed the clip and voila. maybe one of ur grounds in the clip is loose like mine was. if not then check spark with a screwdriver off the cap itself if there is none then its more than likely your distributor. can you smell fuel? when you turn it over