MX-3.com

Well i took a look on ebay for a turbo but i don't know which one is good.

Is this one a good choice:

http://cgi.ebay.ca/93-97-Ford-Probe-MX- ... dZViewItem" onclick="window.open(this.href);return false;

nathan259 wrote:Well i took a look on ebay for a turbo but i don't know which one is good.

Is this one a good choice:

http://cgi.ebay.ca/93-97-Ford-Probe-MX- ... dZViewItem" onclick="window.open(this.href);return false;

Well, the trubo and the wastegate are not very good, they are hit and miss (mostly miss).

The best option here is to get a set of hot pipes and then get a decent turbo (t3/t4 garrett) with a good tial 58mm wastegate. Here is a link to the hot pipes:

http://cgi.ebay.ca/Ford-Probe-2-5L-KLZE ... dZViewItem

You need to modify the crossmember to make these fit as they hang to low for the mx3's. Do a search, there is alot of info on boosting a v6.

the turbo is like 99% a miss LOL


the bov hit and miss, the wastegate , i opened it up and used real tial internals.

Lol, and I am the 1% that says they work fine if you treat them right, and rub them right.....

not that I don't abuse mine everyday but...

So, clearly, what should I buy and where?

Post links if you can... Don't need to be the most powerful one, i only want quality...

The best option here is to get a set of hot pipes and then get a decent turbo (t3/t4 garrett) with a good tial 58mm wastegate. Here is a link to the hot pipes

http://cgi.ebay.ca/Ford-Probe-2-5L-KLZE ... dZViewItem

lol 58mm wast gate, over shooting it by a bit there big a guy a 38 mm will do you just fine till about 400hp buddy dont spwnd the extra money. if you want to drag the car get a decent zised t3 if not and you want to autocross it get a smaller t3 for quick spool up in the corners.

But with that...I don't have an intercooler...where can i find it? And which one?

If you had to ask which turbo will fit "in" your MX-3, You still have alot of research to do. Check out the book "Maximum Boost" by Corky Bell.