Page 1 of 1
323 hatch klze all motor at the drags video
Posted: December 30th, 2007, 5:02 am
by 323v6
heres a vid of my hatch 323 klze stock engine mx6 tranny,22x9 13 sliks and still on this pass it made 2.0 on the 60feet(sucks) its best time is 13.4@101mph
http://videos.streetfire.net/video/4211 ... d5e62e.htm" onclick="window.open(this.href);return false;
Re: 323 hatch klze all motor at the drags video
Posted: January 1st, 2008, 1:29 pm
by timpronk
Great stuff !
Sounds fine and went well. Faster than any mx3 with a ze.
Re: 323 hatch klze all motor at the drags video
Posted: January 1st, 2008, 2:34 pm
by SSR Mx-3
Dang. It was definitely hauling some serious nuts. What were you racing against?
Re: 323 hatch klze all motor at the drags video
Posted: January 1st, 2008, 3:20 pm
by Limegreen mx-3
not bad for a V6 not bad all
nice 323 u got going
Re: 323 hatch klze all motor at the drags video
Posted: January 1st, 2008, 3:48 pm
by 323v6
thanx guys,i ran with a mitsubishi mirage .mi goal is to get the sliks to stick like they are suppose to,with a 1.8 60ft. i should run 13.2
Re: 323 hatch klze all motor at the drags video
Posted: January 1st, 2008, 4:38 pm
by Limegreen mx-3
my best 60ft was 1.9
Re: 323 hatch klze all motor at the drags video
Posted: January 2nd, 2008, 11:21 am
by Custommx3
What rad are you using?
We had to "jimmy-rig" the k8 one in there when we put a k8 in a 323.
Re: 323 hatch klze all motor at the drags video
Posted: January 2nd, 2008, 11:29 am
by Mooneggs
I've always liked the 323. If I could get my hands on a RHD AWD version that would be sweeeeeet
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: 323 hatch klze all motor at the drags video
Posted: January 2nd, 2008, 11:38 pm
by 323v6
AWD+V6 KLZE= crazy shizznit hehehe
Re: 323 hatch klze all motor at the drags video
Posted: January 8th, 2008, 9:43 pm
by bdr2k5
whats your curb weight on that car!?
I mean, a mx-3klze at its best with prolly slicks and decent weight reduction (2400lbs) and a under 2.0 60's might make low 14's and maybe high 13 ( speculations)
and i bet that 323 is what 2200lbs range!?, and u do 13.4, maybe mx-3ers cant drive
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Re: 323 hatch klze all motor at the drags video
Posted: January 9th, 2008, 1:06 am
by Dali
yah, the rad is going to give me problems when it put the 323 back together. i tried putting the v6 rad into it but there was only about 1/4" between the rad and the headers. not too fond of this, even with filled mounts it will probably crush into it. looking into getting a vw rabbit half rad from a friends car, has stupid bungs on it though.