MX-3.com

Posted: **December 7th, 2007, 8:52 pm**

Does anyone know a website or place where I can get a 2nd generation rx7 brake booster check valve?

Posted: **December 8th, 2007, 7:42 pm**

doe sit have to be one from that car? why not a universal one or the stock one in the mx-3??

7

Posted: **December 8th, 2007, 8:21 pm**

Well there was a discussion on here a while back about it and it was said that the one off the 2nd gen rx-7 was the best one to use for the turbo v6 set up. They said the universal one didn't do something that the rx-7 one does and it can handle more than the stock mx-3 one. So I am trying to find one.

http://www.mx-3.com/phpBB2/viewtopic.php?t=51373

Posted: **December 16th, 2007, 12:27 am**

i installed a 1 way check valve from a boat shop that is good for 200psi and i think made of brass

less than $20

Posted: **December 17th, 2007, 6:48 pm**

I have a Millenia brake booster hose on mine. It's been boosted for well over a year and I'm having no problems with it. Regularly running 12psi, it's dyno'd at 18psi with no problems.

Posted: **December 17th, 2007, 9:42 pm**

I just used the stock valve.

Posted: **December 18th, 2007, 6:09 am**

I switched to a millenia one a long time ago when I put on the millenia IM. I think the stock K8 one would probably work too.

Posted: **December 18th, 2007, 2:07 pm**

im loosing brake fluid as i boost :/ wtf... lol

no brake line leaks.. its like if its coming out .. i dont have a check valve.. do i need it?

Posted: **December 18th, 2007, 3:46 pm**

hgallegos915 wrote:im loosing brake fluid as i boost :/ wtf... lol

no brake line leaks.. its like if its coming out .. i dont have a check valve.. do i need it?

UNless you changed the original hose that goes from the mani to the Brakebooster then it should have a stock valve in there already. Thats what i use, a lot of people opt for a stronger one.

Posted: **December 19th, 2007, 3:41 am**

noo mine doesnt have it o.0 i did change the hose.. i think its never had it..

Posted: **December 19th, 2007, 10:48 am**

hgallegos915 wrote:noo mine doesnt have it o.0 i did change the hose.. i think its never had it..

its inside the stock hose..u cant see it..but u can feel it.

Posted: **December 19th, 2007, 1:35 pm**

i changed the hole... ill get one.. from a millenia right? is it like a pcv valve? wow this would explain why my fluid dissapears? o.0

Posted: **December 30th, 2007, 10:56 pm**

using the stock valve will cause high boost to blow past the brake booster and in my case it would blow into the passenger compartment

Posted: **December 31st, 2007, 1:05 am**

Im not using a valve... only thing is that my brake resevoir empties.. but where to? o.0 the manifold? i cant find any leaks inside the car.

MX-3.com

Brake booster check valve

Brake booster check valve

Re: Brake booster check valve

Re: Brake booster check valve