Page 1 of 1

O2 sensor

Posted: May 8th, 2007, 12:07 pm
by Suresperance
i just went to advance auto to price my O2 sensors and the guy told me that it would be 247 a peice for OEM and 91 for a universal i found a few sites that have the 4wire universal ones for $43

my question is is advace joking or is that how much OEM ones really cost and my other question is will this O2 sensor be good enough?(the two at the bottom of the page) thanks any help would be great

http://replacement.car-stuff.com/parts/ ... c=true#top

Posted: May 8th, 2007, 12:44 pm
by Tunes67
Try checking ford probe GT O2 sensors at http://www.rockauto.com

Tunes67

Posted: May 8th, 2007, 5:04 pm
by Suresperance
i went to rock auto and checked for MX-3s they were crazy expensive. but i checkd probe GT now and they are 43 and 46 for the two different ones i think if those will work ill get them any one know if thell be good. im putting them into the probe GT headers so i asume they would work there how about on the ECU end is my only concern

Posted: May 8th, 2007, 5:17 pm
by Tunes67
No offense dude.. but.. do you really think I would have suggested them if they wouldnt work ok? :roll: Lots of people use them.. thats how I found out about them.. and if you had done a bit of research you would have found the same info I did about them ;)

Tunes67

Posted: May 8th, 2007, 10:06 pm
by Suresperance
sorry and thanks again tunes

Posted: May 9th, 2007, 3:53 pm
by aguiloco
this one would work fine? is very cheap! The anouncement says that the sensor is made in "zirconia", not "titania", what kind use own cars?


http://cgi.ebay.es/ws/eBayISAPI.dll?Vie ... &rd=1&rd=1