MX-3.com

I finally got a set of pistons for the rods i got last year, they are Diamond Pistons and are 10.1 CR, ceramic topped, moly coated skirts.

They are built to the beefy 4340 forged Millenia S style rods, w full floating wrist pin.







Stay tuned...next episode will be either EMS, Mr. Speed SC or custom SC grind Colt Cams (210' - 218') cores sent last week.

mmmmmmm.......chocolate cake....i mean VERY NICE

hey how much for something like that?

Spinkx79 wrote:next episode will be either EMS, Mr. Speed SC or custom SC grind Colt Cams (210' - 218') cores sent last week.

Eric, email or call me if you're interested in my Megasquirt Plug-n-Play modified ZE ECU with the coilpack addition.

PWRD_BY_HKS wrote:hey how much for something like that?

I bought a set of 7, with all the trimings (ceramic, moly skirt, plasma rings) and it all came to around $1000 CAD. But i bought a backup.

"The price per piston is $68.00 or $408.00 for six. Wrist pins are $6.00 each or $36.00 for six. A set of rings custom matched to the pistons is $100.00

Total price for everything is $544.00 not including shipping

Coatings are available at an extra charge as follows:
Ceramic top coat is $21.00 per piston or $126.00 for all six.
Moly skirt coat is $15.00 per piston or $90.00 for all six."

jschrauwen wrote:

Spinkx79 wrote:next episode will be either EMS, Mr. Speed SC or custom SC grind Colt Cams (210' - 218') cores sent last week.

Eric, email or call me if you're interested in my Megasquirt Plug-n-Play modified ZE ECU with the coilpack addition.

John,

Ya after tossing it around many times i have decided against MS, with the amount of dough in so far, another grand or so for a true EMS makes more sense to me. If it was a ZE w boltons i would have no problem with MS. Plus i just bought 2 books, "How to Understand and Modify EMS" and "Accel DFI 6.0" <<may have the titles a bit off the books are at home.

Why are you getting rid of it?

And FYI it looks like someone is buying the SC plans from Aldorin. Have your plans changed?

And to all other MS users, please dont post me how good MS is and how cheap it is in comparison. The coil pack idea would be nice, but i already have a complete MSD 6btm setup.

where can i get some of these?

what are your plans for the head??

Steeb wrote:where can i get some of these?

what are your plans for the head??

Pistons u can get on PT, after the BB is done they will offer BB price perm only through the PT member though.

U will need to find a set of the rods, again done in a BB on PT there were 2 runs of 10. I was in on the first, im sure somone will end up changing plans.

I have DE and ZE heads (I change my mind alot), i have interprep springs and new DE retainers. Other than maybe smoothing out the exhaust and O ringing them, thats about it. Oh, custom Colt Cams, i have turbo cams but want and have cores in at Colt for a more agressive SC grind.

look just like mine

i cant wait to see both of your builds finish!

looks good