MX-3.com

Go to http://www.summitracing.com and search for the following part numbers.

part #'s for the ARP head studs are
Item No.......................................... Description
AU4.800-1LUB................................M12X4.80 U/C STUD1.5&1.25 BR
AUN12-2.......................................M12X1.25 12PT NUT STD COLLAR
AUW875........................................M12I D .875OD CHAMF WASHER

I found this info on probe talk http://forums.probetalk.com/showthread.php?t=1701173738

Enjoy

Edit: those are for the Probe GT but it's the 2.2L turbo, not the KL-DE

Ah, so ARP does have a part # for these now. Good you will be happy when you see them. They look really nice.

Did you find #'s for the block studs too?

Not yet, but, I'll look for them...

The link comes from the PT 1st Gen's Forum. Are you sure they are the correct PN's for the KL Headbolts? I'm guessing they aren't.

They won't fit a BP block either....BP's are the same thread pitch as the turbo Eclipse's were. 11MM iirc.

Msg Babyblue, he was looking to having ARP make more for the KL.

See if he got anywhere with them. He had asked me for measurements of mine but i had no measuring devices that could get the info needed (ie thread pitches and stuff).

The guy who arranged the BB on PT should be able to help...try him.

g/l

Dangit, you're right. I'm pretty sure those are for the 2.2L turbo probe. So close!!! and yet so far away!!!