You guys think these rims would look good on the MX3?

General Mazda MX-3 Discussions
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

You guys think these rims would look good on the MX3?

Post by Juans_93_MX3 »

Image

Anyone have a set of these on a MX3?
They only weight 12lbs each
Any pics?
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

Yes there Rota Slipstreams, they come in 15" and 16"(I think). As for as I know Neil has a set of them, he made a thread some time ago about them, he had 15x7" rims IIRC. IMO 15" is to small, the 16's may look good though.
lakersfan1
Senior Member
Posts: 3825
Joined: June 26th, 2003, 2:01 am
Location: Puyallup, WA

Post by lakersfan1 »

Personally, I don't like them. Pretty boring, IMO. Might as well put steel wheels with no hub caps on IMO.
User avatar
Neil
Regular Member
Posts: 961
Joined: June 30th, 2003, 2:01 am
Location: Brandon Manitoba
Contact:

Post by Neil »

I dont have pictures of them on the car yet because well i have been spending almost no money on the car lately and have been caught up with other things.

This is a photoshop that was one by one of the members on here, i dont remember who... but it was somone!
Image

This photoshop doesnt do justice to what they would actually look like taken in a real picture. Do they look good? Yes.

It all depends on what you're going for with your car. I want a stock look thats why i went with them. They're nice rims i cant wait to buy tires for them and actually get them on the car.

Yes they come with centercaps too, so don't worry about that if you are concerned.
Ever notice anyone driving slower than you is an idiot and anyone driving faster than you is a maniac?
01-03 Civic Projector Swap Tutorial
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Post by Juans_93_MX3 »

lakersfan1 wrote:Personally, I don't like them. Pretty boring, IMO. Might as well put steel wheels with no hub caps on IMO.
Now thats the opinion I am looking for
How about these?
http://www.rotawheels.com/wheels.php
(The white ATTACK Wheels)

Or, for a couple $300 more...

Image

btw,
I am looking for 15s. Mostly for the lightness and how cheap the tires are. I might consider 16s
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
User avatar
wagZE
Regular Member
Posts: 887
Joined: February 18th, 2005, 6:31 pm
Location: SEATTLE

Post by wagZE »

slipstrreams are so 5 years ago lol- no really I think we should just leave 'em to the honda guys
1 mx6 88 LX auto 2.2l 4cyl
2 mx6 93 LS saved from junkyard SOLD
3 Mx6 96 M edition blow a ze part it
4 Mx6 96 gold LS paint n lights auto SOLD
5 mx6 red fresh paint clean, sold
1 mx3 92rs sohc auto rota c8s h&r
2 mx3 93 gsze bought w/ mods
3 mx3 93 GSze mtx swp act stg3 str8 nek im eibach kl36
4 mx3 GS SOLD-
6 mx3 white gs jdm swap'd SOLD
*5th mx3 blk GS clean title modded DD*
1 PGT 97 blk, garaged clean sold
2 pgt primered 5 spd KL SOLD
lakersfan1
Senior Member
Posts: 3825
Joined: June 26th, 2003, 2:01 am
Location: Puyallup, WA

Post by lakersfan1 »

Is your car black? If so, I'd pick Enkei PKR (black) or Quantum Tek S02 (graphite).

5 spokes should be on Mustangs and Camaros. 6 spokes look alot classier on imports.
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

I agree with lakers and I think you should consider 16" rims. Konig heliums in bronze look good to and they are lightweight
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

Juan, look at Rota Circut 8's or circut 10'. I think those would look good as well on your car. Subzero and Boost from Rota are also nice.
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Post by Juans_93_MX3 »

You guys are right
Those wheels look better
I am very intrested in the Konig Heliums because they are so light
I dont know yet if I should go with 15"s or 16"s yet
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
User avatar
mitmaks
Senior Member
Posts: 8704
Joined: September 10th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Spokane, WA
Contact:

Post by mitmaks »

they would look perfect on mx-3, I actually wanted to get some for mine
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
Image
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

Juans_93_MX3 wrote:You guys are right
Those wheels look better
I am very intrested in the Konig Heliums because they are so light
I dont know yet if I should go with 15"s or 16"s yet
I realize that 15's are lighter and the tires are abit cheaper, but mx3's are not like a honda. We have huge fender wells and 16's are as small as you can go IMO with aftermarket rims, especially ones that have cureved spokes that curve in on the top. Tires for 16" are not to badly priced either.
sampsonmx3sv
Regular Member
Posts: 36
Joined: July 25th, 2006, 3:18 pm
Location: Edwardsville, IL 20miles frm STL

Post by sampsonmx3sv »

Go white six spoke all the way. I have Traffik's from Konig. White rims look good on any color car.
93 gsr,KLZE with millenia intake, phenolic spacers, HKS intake, limitedslip-auto to manual conversion,centerforce clutch, 75hp NOS wet kit, MSD with blaster coil, white gauges, pacesetter shortshifter, Tenzo seats, lowered 2 inches, Konig Traffik white rims, cat back exhaust
lakersfan1
Senior Member
Posts: 3825
Joined: June 26th, 2003, 2:01 am
Location: Puyallup, WA

Post by lakersfan1 »

sampsonmx3sv wrote:Go white six spoke all the way. I have Traffik's from Konig. White rims look good on any color car.
How much Wild Turkey did you have to drink before you could type that?
sampsonmx3sv
Regular Member
Posts: 36
Joined: July 25th, 2006, 3:18 pm
Location: Edwardsville, IL 20miles frm STL

Post by sampsonmx3sv »

not enough
93 gsr,KLZE with millenia intake, phenolic spacers, HKS intake, limitedslip-auto to manual conversion,centerforce clutch, 75hp NOS wet kit, MSD with blaster coil, white gauges, pacesetter shortshifter, Tenzo seats, lowered 2 inches, Konig Traffik white rims, cat back exhaust
Post Reply

Return to “General Mazda MX-3”