Dyno run No 2 UK KLZE Mx-3

A place for the MX-3 Community in Europe to gather.
Post Reply
User avatar
garfy1981
Regular Member
Posts: 288
Joined: September 27th, 2004, 2:01 am
antispam: ~SPAM*SUX~
Location: UK, South-East
Contact:

Dyno run No 2 UK KLZE Mx-3

Post by garfy1981 »

Previous run was 146bhp with complete 1.8 exhaust system inc cat and headers.
They are long gone and replaced with hotshot headers, hi flow cat, and 2.5 inch mandrel bent exhaust system.

So whilst at trax car show this weekend i decided to do a dyno run to see what the new result was.

My other mods are listed in signature.

Anyhow results were 188.8bhp and 183.3 ft-lb at wheels which i was more than happy with :D



tester came off gas at 5500rpm had a bit of trouble with traction !!


Image



video link;

http://videos.streetfire.net/video/1a97 ... 13d3c9.htm



sorry about quality, camera died, had to use phone
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
User avatar
rsroadkilla
Regular Member
Posts: 537
Joined: February 8th, 2005, 6:46 pm
Location: Reading, UK
Contact:

Post by rsroadkilla »

well happy with that!!!
Image
User avatar
WhiteFinish
Regular Member
Posts: 1635
Joined: April 3rd, 2006, 9:48 am
Location: Netherlands
Contact:

Post by WhiteFinish »

Nice run dude !

I had a go with my own ZE.

The result was 191.2 hp and 245 torq

I have the KLZE with kl31 ecu, ceramic clutch and 65mm exhaust (except headers)
Post Reply

Return to “European MX-3 Community”