[FS] BABYBLUE's part out ..:Every thing you need is here:..

[babyblueMX3]

All prices are in CAD$ + shipping, can pay by paypal (+3% fees) or by money order wich I prefer

Apperance :

Pakfeifer gen 1 front bumper : 250$-SOLD-
Pakfeifer gen 1 side skirts : 250$-SOLD-
Fx designs rear bumper : 250$-SOLD-
Stock fenders with z3 insert molded : 150$-SOLD-
Cork sport clear turn signal with housing : 50$-SOLD-
Clear lights : 50$-SOLD-
Dual gauge pod (A pillar) : 40$-SOLD-
Custom tripple gauge pod (replace vent in 92-93 dash) in the center console) need paint and finish: 40$-SOLD-
Steering blue/black/chrome with hub momo : 75$
vibrant shift boot (white) : 30$
indiglo gauge : 40$-SOLD-
gauge bezel brush silver : 20$-SOLD-
momo crystal shifter : 30$
carbon fiber rad support : 100$-SOLD-
Diamond floor mats : 15$-SOLD-

Wheels/tires/suspension/brakes:

(2) 15" MH slicks mounted on acura rims noir: 200$-SOLD-
(8 ) stock 15" honeycomb wheels (no rubber) : 30$ each.
(4) cross drilled rotors : 150$-SOLD-
(4) stainless steed brake lines : 80$-SOLD-
suspension techniques coils (1.3 F/R) : 200$
tokico struts (zx2 conversion) : 200$-SOLD-
(4) adjustable solid end links : 75$
rear strut tower bar : 40$-SOLD-
OBX camber bolts. (don't know how these go for) :15$

engine/turbo stuff:

block --klze borer 0.020 over, scat rods, polished crank, wiseco pistons broken but can have brand new pistons, cylinder needs to be honed slightly: price to be discussed]-90% sold-
klze heads --titanium retainers, interprep valve springs, felpro duratec valve seals, stock hla, stock valves, decked and cleaned 3000km ago. : 400$-SOLD-
turbo cams unused : 400$
millenia intake manifold polished with 67mm TB : 200$-SOLD-
fuel rail bored over for nissan injectors / powder coated cosmo blue : 100$-SOLD-
Aeromotive fuel pressure regulator : 75$ -SOLD-
Unorthodox underdrive pulley anodize blue: 75$-SOLD-
Outlaw engineering pheno. spacers (intake+tb) : 50$-SOLD-
MBX fuel rail adapter : 20$-SOLD-
MSD 8mm spark plug wire (red) : 50$-SOLD-
custom 2.25 crush bent cat back with /CATCO hi flow cat and 2.5in/out muffler (super turbo) : 50$-SOLD-
Tial 38mm wastegate : 150$-SOLD-
28x8x3.5 bar and plate intercooler with braket welded on :300$
(2 set) turbo piping : hot pipes for mx-3 (stainless steel) : 600$
turbo piping : cold pipes 2.25 pre intercooler and 2.5 post intercooler : 400$
(6) nissan injectors modded to 550cc (red top):-SOLD-
(3-4) nissan injectors modded to 440cc (pink top):
Walbro 255lph fuel pump : 75$-SOLD-
Turbosmart (almost new) boost controller (manual) : 75$-SOLD-
Megasquirt and spark(first group buy on Probetalk) with waterinjection : 250$-SOLD-
Pentium 255Mhz laptop : 200$
MSD 6A with blaster 2 coil : 120$-SOLD-
klze disty : 50$-SOLD-
Greddy turbo timer : 40$-SOLD-
Autometer gauges (oil pressure, a/f and boost) : 35$ each.-SOLD-
Optima yellow top battery : 50$-SOLD-
(2) 12" Slim fans : 75$-SOLD-
Battery relocation kit : 40$
(2) tranny G25M-R (one from a probe other from my mx-3) : 200$ each.
clutch (ACT Z62-HDSS) clutch : holds GREAT : 200$ (plate and disc)-SOLD-
stainless steel clutch line : 20$-SOLD-
Pacesetter adjustable short shifter : 75$-SOLD-
Custom made 350whp axles : 300$-SOLD-
SRD bushings: extension rod + engine mounts member : 50$-SOLD-
Cosmo blue powder coated valve covers : 100$-SOLD-
Cross member modded for turbo pipes : 40$ -SOLD-
Blue oil catch can 20$ http://img.photobucket.com/albums/v311/ ... 006014.jpg
Oil pan tapped for turbo oil drain : 30$
2.5 Stainless steel flex pipe (around 10-12" long) : 20$


I still have tons of stock spare parts (i.e. doors, seats, gs spoiler, interior, oil pumps. water pumps, tensioners, belts etc.....)[/url]

[mx3optidrive]

pm sent

[babyblueMX3]

pm sent

replied

[lakersfan1]

Too pricey for me. Some of that s--- I can get new for the same price.

[babyblueMX3]

Too pricey for me. Some of that shat I can get new for the same price.

what ??? what parts are you refering too.
People on PT says that everything on there are VERY CHEAP. You're the only on that says that and god know how many replys and pm I got since an hour

[Nd4SpdSe]

OMG, I can't believe I'm seeing this...I guess I'll never see your Mx-3 in person, or at the Ottawa Meet this year

Man, it's christmas , too bad i'm not working

[mx3optidrive]

added you to my msn

[kmvmx3]

Interested in the IM. Does it still have the vris and does it come with fuel rail + injectors. Pics to Kaokimy@yahoo.com

[babyblueMX3]

Interested in the IM. Does it still have the vris and does it come with fuel rail + injectors. Pics to Kaokimy@yahoo.com

no vris stuff, they were welded shut for my boosted applications, yes it comes with rails and injectors (stock)

[fieromx3]

i cant beleive it my inspiration to the mx3 is gone....lots of nice parts to bad i dont got money..

[PATDIESEL]

What are you doing with the rest of the car?

[Bochek]

somebody just buy the whole car to keep one of the nicest mx-3's on the road!

Bochek

[lakersfan1]

Too pricey for me. Some of that shat I can get new for the same price.

what ??? what parts are you refering too.
People on PT says that everything on there are VERY CHEAP. You're the only on that says that and god know how many replys and pm I got since an hour

The only parts I looked at were the struts and the springs. Both can be found online for the same price brand new. Unless the French Canadian dollar is worth less than the regular Canadian dollar.

[nos92mx3]

could i get some pics of the aeromotive fpr?

What happened man?

[Slammed6]

Hey babyblue, Cash in hand for a couple things:

Interested in the Curve neck with TB upon pictures...and also the MSD wires. Please get back to me ASAP.

Slammed6@hotmail.com