MX-3.com

hi guys im kind of stuck what fuel pump should i get i was thinking walbro 255 lph hp fule pump is this only a in line pump and ndo i remove the stock pump or run both thank you for answering my dumb q
later

Well you have an option to run an inline fuel pump, or a intank fuel pump.

I have a walbro 255 HP in my MX-3 right now, and it was an intank fuel pump that replaces your stock one. Well worth the money, you can find them relatively cheap on ebay.

Unless your pushing out mad HP, or need that extra fuel. Even with a KLZE with mods the 255 is way overkill. I myself had one, and the stock FPR couldnt take the pressurte and killed my mileage and ran very rich. I ended up buying an AFPR just to fix issues I had with the walbro 255.

with a modded car and 50-75 shot of juice you only need a 190

thanks guys all i seem to find was the in line ver ,i thought i was on a witch hunt thanks
as far as a need i aim in tne process of turboing the car and am useing the megasqurit to control the fule dose anyone know where i can get my hands on some 550 nissan injectors ..
or is there a plug and play 550 that will fit our fule rail thanks again

You should be able to get the injectors at a junkyard. I recently bought a set in the rails with the connectors from a company on ebay that sells, fuel rails and etc. I only paid a little over $100 shipped for the whole thing, so it wasn't that bad. If you want to use them let me know and i'll get you their e-mail.

yes please im going mad trying to find a set it like 410 for a new set thanks

Here is their e-mail ebay@everyautoneed.com . Just write them and ask for some injectors/rails or whatever you need from one of the cars on the list babyblue put on the write up. They should be able to help.

pretty much all nissan injectors (side feed) once modded will give 550cc. though they might have slight variation between the 6 injectors if you don't get them from the same car.

thanks guys ill give them a try

injectors out of a Nissan Frontier/Exterra 3.3 V6 Fuel Rail With InJectors
i found but no engine code so i dont know if there right

Where did you find those. All you have to do is e-mail them with exactly what you need and they will let you know if they have it. I got mine from a doch 3.0 Maxima. you can use like 92-95 and 95-98 or something like that.

thank you slimmyslim1420
i did just that but i found the other ones on ebay before they got back to me . but all is good he has a set and there on there way so big thanks for the link and the help all is good got the intank and the injectors comming

Thought you might like to see the specs both the 255lph and 255lph High Pressure pums.

http://www.vfaq.com/mods/Walbro-specs.html

Typically a 255 HP can support around 500HP

nice chart thats what inline preformance said in his emails
but its nice to hear it from somone else thanks