[FS] partially parting out 93 mx3 gs

projectmx · Post by **projectmx** » January 22nd, 2006, 9:33 am

I just picked up a black manual 93 gs there will be a lot of parts i don't need since i'm putting a bp in it so i am going to offer up stuff for sale

mud gards $15
engine $200 (will include ps pump / water pump / manifolds / maybe more)
trans $250 (for $400 i will include everything needed for a atx to mtx swap)
axles $30 (each or 45 for the pair)
ecu $30
wire harness $30
radiator $40
gs spoiler $50

i might have more items for sale off the car but i dont know what all i can pull off hand so if you need somethign ask me and maybe i can sell it.. and if any of the parts are outrageously priced then talk to me and i could probably work something out

a note on the engine it isn't running but was getting spark and fuel .. mechanic said it needs new wire / plugs / and distributor and should work just fine only has 109K on it

a note on trans has a new clutch with only a couple of thousand miles

Reaver19 · Post by **Reaver19** » January 22nd, 2006, 12:33 pm

Trying to get the passenger side halfshaft off of a 93' mx-3 that has no anti-lock brakes, and I'm not sure if it has to have a manual tranny or not, but mine is a manual, so if yours is a manual and you'd be willing to get rid of that part, I'm definately interested, thanks.

projectmx · Post by **projectmx** » January 22nd, 2006, 2:40 pm

it is a manual however i dont know if it does or doesn't have abs i'll have to check that out... if so and the price it right i could get the part for you... will take a little work but let me see waht i can do

Reaver19 · Post by **Reaver19** » January 23rd, 2006, 10:06 am

well, if it doesn't have abs, and it's in decent shape, I'll give you 60 for it, plus I pay whatever the shipping is on that.+

hppwdn · Post by **hppwdn** » January 23rd, 2006, 11:47 pm

Interested in the axles if the car is non ABS.

projectmx · Post by **projectmx** » January 24th, 2006, 7:01 pm

the half shaft is on the pasanger side between the axle and the trans correct? i will check to see if i can get those axles and half shaft this weekend while i'm workin on the car... i wont have a garage to work in till end of next month so i can't promise.. it was supposed to go in sooner but kinda got pushed back

Reaver19 · Post by **Reaver19** » January 24th, 2006, 7:56 pm

The halfshaft goes from the tranny to the hub...um can't really describe it any better than actually getting you a pic, is that good enough descrip for ya? Check google for pics

projectmx · Post by **projectmx** » January 24th, 2006, 8:02 pm

ok there are two parts that go from the tranny to the hub on the passenger side.. one is an axle and the other is like an extender for the axle..

sinhron · Post by **sinhron** » January 25th, 2006, 3:14 am

I am interested in the 2 lower engine mounts, PM or E-mail me if you have them and want to sell.
Thanks

projectmx · Post by **projectmx** » January 25th, 2006, 6:56 am

some of these parts may have to wait... such as the lower engine mounts... i won't have a place to put the engine till the car is garaged and that got postponed till end of feb... unless of course i sell the engine... but i will see what i can do

Reaver19 · Post by **Reaver19** » January 25th, 2006, 10:27 am

This is a halfshaft, for some vehicle, which one I don't know. But just to give you an idea of what your looking for here is one... It's very similiar to this halfshaft, except for the part I put a red box around, it's different there. I put a blue circle around a part on this halfshaft in the picture that is quite different from ours, where the blue circle is, ours will have a mount that bolts onto some part (can't think of what right now), it's got 3 bolt holes, and is almost like the shape of a triangle, almost. Let me know if this helps.

billzie · Post by **billzie** » January 25th, 2006, 3:16 pm

I believe the part that is circled is referred to as a "jack-shaft" or intermediate shaft. The "half-shaft" is the part with the two C.V. joints, it is termed "half-shaft" simply because it is half of the "front" axle/driveshaft.
HTH, Bill.

nicksmx3 · Post by **nicksmx3** » January 25th, 2006, 3:30 pm

can i see a pic of the spoiler?

projectmx · Post by **projectmx** » January 26th, 2006, 10:47 am

ok give me a little bit to catch up i didn't expect such a turn out

plus i still own't have use of my friends garage till end up next month at least and i'm moving in a few weeks... i am going down this weekend to see how much of the stuff that was requested i can get off in a day... and i will also see if i can get some more pics of everything and find out if the car is abs or not ... and thanks for finally clarifying the halfshaft thing... i already had an offer on the axles but i will look back and see who asked first... please please be patient everyone... this is my first tear down and i don't want to break anything so i am going to go at a somewhat slow pace... when it gets in my friends garage things will very much speed up.. all i ask is patience

Reaver19 · Post by **Reaver19** » January 27th, 2006, 9:49 am

Well let me know as soon as you find out whether it has abs or not, and let me know as soon as you have the part, I'll get you the $ asap.