Rear Lower Tie Bar
- Jovian2k
- Supporting Member
- Posts: 851
- Joined: June 3rd, 2004, 2:01 am
- Location: La Prairie, QC + Stratford, CT
Rear Lower Tie Bar
I have a 93 RS, so naturally I do not have a rear lower tie bar. I would like to get one and have two options:
Stock GS http://cgi.ebay.com/ebaymotors/MAZDA-MX ... dZViewItem
or SRD http://www.srdperformance.com/
The one on ebay is considerably cheaper, anyone replaced the stock one with an SRD? any difference? I'm sure the stock GS is better than nothing either way...
Stock GS http://cgi.ebay.com/ebaymotors/MAZDA-MX ... dZViewItem
or SRD http://www.srdperformance.com/
The one on ebay is considerably cheaper, anyone replaced the stock one with an SRD? any difference? I'm sure the stock GS is better than nothing either way...
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
stock GS will work just fine. SRD just looks better you know. but there no difference, at least I didnt notice any.
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
Re: Rear Lower Tie Bar
Just go with the GS bar.Jovian2k wrote:I have a 93 RS, so naturally I do not have a rear lower tie bar. I would like to get one and have two options:
Stock GS http://cgi.ebay.com/ebaymotors/MAZDA-MX ... dZViewItem
or SRD http://www.srdperformance.com/
The one on ebay is considerably cheaper, anyone replaced the stock one with an SRD? any difference? I'm sure the stock GS is better than nothing either way...
Ever notice anyone driving slower than you is an idiot and anyone driving faster than you is a maniac?
01-03 Civic Projector Swap Tutorial
01-03 Civic Projector Swap Tutorial
-
- Regular Member
- Posts: 248
- Joined: September 24th, 2003, 2:01 am
- Location: Corona, CA
- Contact:
I make lower tie bars for the Protege, the front does not fit, but the rear does.
http://www.clubprotege.com/forum/showthread.php?t=19235
I plan to make front bars to fit the MX3 in the next few months as i plan to get an MX3 donnor car very soon
http://www.clubprotege.com/forum/showthread.php?t=19235
I plan to make front bars to fit the MX3 in the next few months as i plan to get an MX3 donnor car very soon
THINK FAST, GO RACING!!
2004 Mazda6 Wagon
2004 Mazda3 Sedan
1990 BG8P Protege LX - KLZE - Race Preped - #98 SM - SCCA Solo2
2004 Mazda6 Wagon
2004 Mazda3 Sedan
1990 BG8P Protege LX - KLZE - Race Preped - #98 SM - SCCA Solo2
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
front tie bar for mx3? that would be nice, what else you can make, any aftermarket sway bars etc?Mazdaracer wrote:I make lower tie bars for the Protege, the front does not fit, but the rear does.
http://www.clubprotege.com/forum/showthread.php?t=19235
I plan to make front bars to fit the MX3 in the next few months as i plan to get an MX3 donnor car very soon
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
-
- Regular Member
- Posts: 248
- Joined: September 24th, 2003, 2:01 am
- Location: Corona, CA
- Contact:
I have been making tie bars for the BG chassis for a few years now.mitmaks wrote:front tie bar for mx3? that would be nice, what else you can make, any aftermarket sway bars etc?Mazdaracer wrote:I make lower tie bars for the Protege, the front does not fit, but the rear does.
http://www.clubprotege.com/forum/showthread.php?t=19235
I plan to make front bars to fit the MX3 in the next few months as i plan to get an MX3 donnor car very soon
I am working on the front tie bar for the MX3, strut bars, rear control arms and a few other goodies. All but the rear strut bar should fit the MX3 (unless it's the same as the Protege, but i don't think so)
I haven't been able to find a place to help me make sway bars, but the Protege and MX3 sways are very different.
THINK FAST, GO RACING!!
2004 Mazda6 Wagon
2004 Mazda3 Sedan
1990 BG8P Protege LX - KLZE - Race Preped - #98 SM - SCCA Solo2
2004 Mazda6 Wagon
2004 Mazda3 Sedan
1990 BG8P Protege LX - KLZE - Race Preped - #98 SM - SCCA Solo2
-
- Regular Member
- Posts: 248
- Joined: September 24th, 2003, 2:01 am
- Location: Corona, CA
- Contact:
Phone Book, or go find an Online Phonebook for your area and do a search on there. Thats about all i can think of.Jovian2k wrote:what is the best way to do junk yard searches? I have no idea where any are near me in RI...
Ever notice anyone driving slower than you is an idiot and anyone driving faster than you is a maniac?
01-03 Civic Projector Swap Tutorial
01-03 Civic Projector Swap Tutorial
- ccreech
- Regular Member
- Posts: 477
- Joined: July 14th, 2004, 2:01 am
- Location: Lawrenceville, Ga
- Contact:
I still have 4 GS rear tie bars in the big pile of stuff that has been in my garage for forever. $15 + shipping. I would like to start getting rid of this stuff so if anyone is still looking for anything on this list please PM me or respond in that thread.
http://www.mx-3.com/phpbb2/viewtopic.ph ... ght=crates
Jeff asked me if I was still doing this a few months back because the post had become burried. I WILL get rid of these parts in the next few months. If nobody here wants to buy them I am going to start posting it up on Ebay and jacking the prices up. They are taking up too much room in the garage and I am ready to be through with it. I would rather help out you guys, and mx-3.com, if at all possible. So take a look if you are interested.
Jeff, I haven't forgotten about you. We will settle up in the next few months.
http://www.mx-3.com/phpbb2/viewtopic.ph ... ght=crates
Jeff asked me if I was still doing this a few months back because the post had become burried. I WILL get rid of these parts in the next few months. If nobody here wants to buy them I am going to start posting it up on Ebay and jacking the prices up. They are taking up too much room in the garage and I am ready to be through with it. I would rather help out you guys, and mx-3.com, if at all possible. So take a look if you are interested.
Jeff, I haven't forgotten about you. We will settle up in the next few months.
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
going in tomorrow more than likely.jschrauwen wrote:
Got Luc's rear lower tie bar but haven't installed it yet. Gotta get this lazy butt under the car again ...LOL
catch up old man.
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462