Page 1 of 1
Need help with my alarm. asp
Posted: January 2nd, 2006, 6:53 am
by mantaboy
So then the hole alarm was fitted in. But the autolock function don`t work. I done the following: fitted in the two signalskabels with the unlock (green/orange) and the lock kabel(green/red) And also the ground kabel in the blue/red kabel. But the only thing that works is to lock the passangers door.
What could be wrong? Need help asp.
Posted: January 3rd, 2006, 5:33 am
by mantaboy
no one? need help! The car got powerlocks original. I made a serch and didn`t find anything.
Posted: January 3rd, 2006, 9:55 am
by den
Does your car have an actuator on the driver side door? If none then you have to add one and relay as well. Actuator is around 12 bucks plus 2 relays for around 14 bucks. I got mine from a shop that installs remote starters and alarms. It's pretty easy to install. If you need the wiring diagram for it let me know. Good luck!
Posted: January 4th, 2006, 7:08 am
by mantaboy
I don`t know onest;P I should look it up, but can you send over the wiringdiagrams to my mail please, it is
pelle_333_30@hotmail.com
Posted: January 4th, 2006, 1:41 pm
by Mazdaracer
Posted: January 4th, 2006, 1:54 pm
by den
email sent