ok i was goona post this later this week but o well i had posted this on vital motion but no one is helping. im starting to gather some parts up for my turbo setup i had put a down payment on the nulk buy turbo manny and will have that in january w/e its made. im lookin for an intercooler now and wanna know what size to go with and any suggestions is greatful. i was lookin at this one from yonaka
http://www.horsepowerfreaks.com/sale/Yo ... ront_Mount
its seems like a good size and an overall good intercooler.
also there is a 26x12x3'' and is rated to 650hp
p.s. im plannin 25psi with a precision pt-63 turbo
plz help with IC
- fieromx3
- Supporting Member
- Posts: 2743
- Joined: June 27th, 2005, 7:58 pm
- Location: Guelph, ontario
- Contact:
plz help with IC
93' MX-3 GS-ZE
14.4 @ 96.7
14.5 @ 97.2
14.4 @ 96.7
14.5 @ 97.2
- fieromx3
- Supporting Member
- Posts: 2743
- Joined: June 27th, 2005, 7:58 pm
- Location: Guelph, ontario
- Contact:
also are the intercoolers with the vertical fin type better? where do i find these type i cant seem to find a manufacturer that makes them.
any suggestions is welcome regarding
what HP it can support
size
flow
anything that will help and suggesting a specific type is appreciated
just found the 26x12x3 is rated 650hp and flows 900cfm and pressure tested to 30psi
and a review of it.... http://home.att.net/~mabuhaycarlos/Intercooler.html
any suggestions is welcome regarding
what HP it can support
size
flow
anything that will help and suggesting a specific type is appreciated
just found the 26x12x3 is rated 650hp and flows 900cfm and pressure tested to 30psi
and a review of it.... http://home.att.net/~mabuhaycarlos/Intercooler.html
93' MX-3 GS-ZE
14.4 @ 96.7
14.5 @ 97.2
14.4 @ 96.7
14.5 @ 97.2
-
- Junior Member
- Posts: 28
- Joined: November 21st, 2005, 8:16 pm
try this site, they can answer any ic design questions you have:
http://www.bellintercoolers.com/pages/AAMain.html
http://www.bellintercoolers.com/pages/AAMain.html